feat: 更新 display.c，添加反转输出标志并移除不必要的日志和 GPIO 设置

- 修改触摸控制芯片 CST816 和六轴惯性测量单元 QMI8658A 的描述，说明它们共用 I2C 总线（IO47/IO48）
- 更新触摸屏和 IMU 传感器的引脚信息，确保文档准确反映硬件配置
- 添加 I2C 设备与固件配置部分，提供设备地址和说明

README.md

@@ -13,12 +13,12 @@
 |                    | 叠封 PSRAM       | **8MB**                            | 用于运行代码，性能优异           |
 |                    | 外接 Flash       | **16MB** (W25Q128)                 | 存储程序和数据                   |
 | **显示与触摸**     | LCD 屏幕         | 1.9英寸，170×320分辨率，262K彩色   | 驱动IC为ST7789V2                 |
-|                    | 触摸控制芯片     | **CST816** (电容式)                | **触控版特有**，通过I2C接口      |
+|                    | 触摸控制芯片     | **CST816** (电容式)                | **触控版特有**，I2C 与 IMU 共用 IO47/IO48 |
 | **无线通信**       | Wi-Fi            | 2.4GHz, 802.11 b/g/n               |                                  |
 |                    | 蓝牙             | Bluetooth 5 (BLE)                  |                                  |
 |                    | 板载天线         | 贴片陶瓷天线                       |                                  |
 |                    | 外部天线接口     | **IPEX-1 连接器**                  | **触控版特有**，需修改焊盘启用   |
-| **传感器**         | 六轴惯性测量单元 | **QMI8658**                        | 包含3轴加速度计和3轴陀螺仪       |
+| **传感器**         | 六轴惯性测量单元 | **QMI8658A**                       | 与 CST816 共用 I2C 总线（IO47/IO48） |
 | **存储扩展**       | Micro SD 卡槽    | 支持Micro SD卡                     | 位于PCB背面                      |
 | **电源管理**       | 电池接口         | MX1.25 连接器                      | 支持3.7V锂电池**充放电**         |
 |                    | USB供电          | USB Type-C 接口                    | 同时用于下载调试                 |
@@ -37,18 +37,18 @@
 |                   |          | IO12           | LCD\_CS（片选）            |
 |                   |          | IO13           | LCD\_DIN（数据输入）       |
 |                   |          | IO14           | LCD\_BL（背光控制，PWM）   |
-| **触摸屏**        | I2C      | IO47           | TP\_SDA（数据线）          |
+| **触摸屏 / I2C 总线** | I2C   | IO47           | TP\_SDA / IMU\_SDA（与 IMU 共用） |
-|                   |          | IO48           | TP\_SCL（时钟线）          |
+| (CST816 + QMI8658)    |       | IO48           | TP\_SCL / IMU\_SCL（与 IMU 共用） |
-|                   | GPIO     | IO17           | TP\_RESET（复位）          |
+|                       | GPIO  | IO17           | TP\_RESET（复位）                 |
-|                   |          | IO21           | TP\_INT（中断）            |
+|                       |       | IO21           | TP\_INT（中断）                   |
 | **SD 卡**         | SPI      | IO5            | SD\_CS（片选）             |
 |                   |          | IO39           | SD\_CLK（时钟）            |
 |                   |          | IO40           | SD\_MISO（主入从出）       |
 |                   |          | IO41           | SD\_MOSI（主出从入）       |
-| **IMU 传感器**    | I2C      | IO8            | IMU\_SDA（数据线）         |
+| **IMU 传感器**    | I2C      | IO47           | IMU\_SDA（与 TP 共用，见上） |
-| (QMI8658A)        |          | IO7            | IMU\_SCL（时钟线）         |
+| (QMI8658A)        |          | IO48           | IMU\_SCL（与 TP 共用，见上） |
-|                   | GPIO     | IO6            | IMU\_INT1（中断1）         |
+|                   | GPIO     | IO8            | IMU\_INT1（中断1）         |
-|                   |          | IO15           | IMU\_INT2（中断2）         |
+|                   |          | IO7            | IMU\_INT2（中断2）         |
 | **UART0 串口**    | UART     | IO43           | U0\_TX（发送）             |
 |                   |          | IO44           | U0\_RX（接收）             |
 | **用户按键**      | GPIO     | IO0            | BOOT0（启动/下载模式）     |
@@ -63,6 +63,17 @@
 | **扩展排针 J3**   | 混合     | IO0~IO14       | 20Pin 排针，引出主要 GPIO  |
 | **扩展排针 J4**   | 混合     | IO14~IO48等    | 20Pin 排针，含 USB/3V3/地  |
 
+### I2C 设备与固件配置
+
+触控版 PCB 上 **CST816（触摸）** 与 **QMI8658A（IMU）** 挂载在同一条 I2C 总线（`I2C_NUM_0`，SDA=IO47，SCL=IO48）。固件在 `main/bsp/board_config.h` 中定义引脚，触摸与 IMU 驱动共用该总线句柄。
+
+| 设备     | I2C 地址（7-bit） | 说明                          |
+| :------- | :---------------- | :---------------------------- |
+| CST816S  | 由驱动自动探测    | 电容触摸                      |
+| QMI8658A | `0x6A` 或 `0x6B`  | 由 SDO 电平决定；本板实测多为 `0x6B` |
+
+IMU 中断引脚（IO8 / IO7）当前固件采用轮询采样，Phase 4 可改为中断驱动。
+
 ## Wi-Fi Station Example
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

docs/spec/settings-screen-landscape.md

@@ -0,0 +1,765 @@
+# Settings 横屏页面实现规格
+
+> 项目：HeavenlyHeroStar  
+> 目标芯片：ESP32-S3  
+> ESP-IDF：6.0.1  
+> LVGL：9.2.2  
+> 逻辑分辨率：320×170（全局横屏）  
+> 状态：待实现（v1.2 修订稿）
+
+## 1. 背景与目标
+
+### 1.1 现状
+
+当前 UI 层由 SquareLine Studio 生成，尚无 Settings 页面：
+
+| 模块 | 路径 | 说明 |
+|------|------|------|
+| 物理分辨率 | `main/bsp/board_config.h` | `BOARD_LCD_H_RES=170`, `BOARD_LCD_V_RES=320`（竖屏面板） |
+| LVGL Display | `main/bsp/lvgl_port.c` | 以 170×320 创建 display，无旋转 |
+| 触摸 | `main/bsp/touch.c` | CST816S，`swap_xy/mirror_x/mirror_y` 均为 0 |
+| 背光 | `main/bsp/display.c` | `display_backlight_set_brightness(0–1023)` 已实现 |
+| UI 屏幕 | `main/ui/screens/ui_Screen{1,2,3}.c` | Screen1 日历 170×320；Screen3 为默认启动页 |
+| 事件处理 | `main/app/ui_handlers.c` | HID 相关回调，与 SquareLine 生成的 `ui_events.c` 分离 |
+| NVS | `main/app/app_main.c` | 已初始化 `nvs_flash`，Settings 尚未使用 |
+| WiFi | `main/services/wifi_manager.c` | `BOARD_WIFI_ENABLED=0`，Network Tab 首版为占位 |
+
+### 1.2 目标
+
+实现 **Settings 设置页**，采用 **Master-Detail（主从）** 布局：
+
+- 左侧 Sidebar（90px）：System / Display / Audio / Network 导航 + Save 按钮
+- 右侧 Content（230px）：随 Tab 切换动态刷新的设置项
+- **全局横屏**：启动后 LVGL 逻辑分辨率为 **320×170**，所有页面按横屏坐标设计
+
+首版（MVP）交付：
+
+- BSP 横屏基础设施（display 旋转 + touch 校准）
+- Settings 屏幕骨架与 Tab 切换机制
+- System Tab 完整功能（恢复出厂）
+- Display Tab 亮度滑块（实时预览 + NVS 持久化）
+- Audio / Network Tab 占位 UI + NVS 存根
+- Save 按钮写入 NVS；Factory Reset 恢复默认并重启
+
+### 1.3 方案选型结论
+
+| 方案 | 说明 | 结论 |
+|------|------|------|
+| A | SquareLine Studio 导出静态 Settings 屏 | 不利于 Tab 动态刷新，且易被重新导出覆盖 |
+| **B** | **手写 C + `lv_obj_clean` 动态加载** | **采用**：模块化、可扩展、与 SquareLine 解耦 |
+| C | 每个 Tab 独立 Screen，lv_scr_load 切换 | 内存占用高，Sidebar 需重复创建 |
+| 横屏-硬件 | 修改 ST7789 scan direction | 不采用：需改 panel 驱动，touch 仍须软件映射 |
+| **横屏-软件** | **`lv_display_set_rotation(90°)`** | **采用**：改动集中在 BSP，UI 直接用 320×170 坐标 |
+
+---
+
+## 2. 页面布局
+
+### 2.1 整体结构（320×170）
+
+**System Tab 选中时：**
+
+```text
++---------------------------------------------------------------+
+| Sidebar 90px          | Content 230px                         |
+| [System] *            | System Settings              --:--   |
+| [Display]             | ----------------------------------- |
+| [Audio]               | Enable Notification    [switch OFF] |
+| [Network]             |                                     |
+| [Save]                | [Factory Reset]                     |
++---------------------------------------------------------------+
+|<-- 90px -->|<-------------------- 230px -------------------->|
+```
+
+**Display Tab 选中时（Content 区域示意）：**
+
+```text
+| Display Settings             --:--   |
+| ----------------------------------- |
+| Brightness: [=======>     ]      70% |
+```
+
+### 2.2 区域参数表
+
+| 区域名称 | 宽度 | 高度 | 位置 (x, y) | LVGL 控件 | 说明 |
+|----------|------|------|-------------|-----------|------|
+| Screen 根 | 320 | 170 | (0, 0) | `lv_obj_create(NULL)` | 禁用滚动 |
+| Sidebar | 90 | 170 | (0, 0) | `lv_list` | 导航容器；显式设 `pad_all=2`、`item_gap=2` |
+| Sidebar 导航按钮 ×4 | 86 | 28 | 相对 list，y 递增 | `lv_list_add_button` | System/Display/Audio/Network |
+| Save 按钮 | 86 | 28 | (2, 138) | `lv_button` | 固定底部，不在 list 内滚动 |
+| Content 容器 | 230 | 170 | (90, 0) | `lv_obj` | 动态刷新区域 |
+| StatusBar | 230 | 25 | (0, 0) 相对 content | `lv_obj` + `lv_label` ×2 | 标题左、时间右 |
+| SettingsBody | 230 | 145 | (0, 25) 相对 content | switch/slider/button | 各 Tab 内容 |
+
+### 2.3 紧凑布局约束
+
+170px 高度下必须严格控制间距，避免纵向滚动：
+
+| 约束项 | 值 |
+|--------|-----|
+| Screen / Sidebar / Content `pad_all` | ≤ 2px |
+| 导航按钮间距 | 2px |
+| SettingsBody 行高 | 32–36px |
+| 字体 | Phase 1 使用 `LV_FONT_DEFAULT`；Phase 3 可换 12px 定制字体 |
+| 滚动 | Screen、Sidebar、Content 均移除 `LV_OBJ_FLAG_SCROLLABLE` |
+
+### 2.4 System Tab 控件坐标（相对 SettingsBody）
+
+| 控件 | x | y | 宽 | 高 | 类型 |
+|------|---|---|----|----|------|
+| Label "Enable Notification" | 4 | 4 | 120 | 28 | `lv_label` |
+| Switch 通知 | 180 | 4 | 40 | 28 | `lv_switch` |
+| Button "Factory Reset" | 4 | 112 | 100 | 28 | `lv_button` |
+
+### 2.5 Display Tab 控件坐标（相对 SettingsBody）
+
+| 控件 | x | y | 宽 | 高 | 类型 |
+|------|---|---|----|----|------|
+| Label "Brightness" | 4 | 4 | 80 | 28 | `lv_label` |
+| Slider 亮度 | 88 | 8 | 100 | 12 | `lv_slider` |
+| Label "70%" | 196 | 4 | 30 | 28 | `lv_label` |
+
+> Audio / Network Tab 坐标见 §5.2；布局模式一致（label 左 80px + 控件区 140px）。
+
+---
+
+## 3. 系统架构
+
+### 3.1 模块划分
+
+```text
+main/bsp/
+├── board_config.h       # 新增 BOARD_LCD_LOGIC_H_RES/V_RES
+├── lvgl_port.c          # rotation + flush_cb 软件旋转（真机验证）
+├── touch.c              # 物理面板 touch 对齐（非 LVGL 旋转）
+└── display.c            # 背光 API（已有）
+
+main/ui/
+├── screens/
+│   └── ui_Settings.c/.h     # 屏幕骨架：sidebar + content + Save
+├── settings/
+│   ├── settings_types.h     # settings_data_t、Tab 枚举
+│   ├── settings_store.c/.h  # NVS 读写、默认值、commit/reset
+│   └── settings_tabs.c/.h     # load_xxx_settings() 动态构建控件
+├── ui.c / ui.h              # 注册 Settings 屏幕
+└── ui_events.c              # SquareLine 生成，不修改
+
+main/app/
+└── ui_handlers.c            # Settings 事件回调（Save/Tab/Slider 等）
+```
+
+### 3.2 架构图
+
+```mermaid
+flowchart TB
+    subgraph bsp [BSP Layer]
+        Display["display.c"]
+        LVGLPort["lvgl_port.c"]
+        Touch["touch.c"]
+    end
+
+    subgraph ui [UI Layer]
+        SettingsScreen["ui_Settings.c"]
+        SettingsTabs["settings_tabs.c"]
+        SettingsStore["settings_store.c"]
+    end
+
+    subgraph app [App Layer]
+        UIHandlers["ui_handlers.c"]
+    end
+
+    Display --> LVGLPort
+    LVGLPort --> SettingsScreen
+    Touch --> LVGLPort
+    SettingsScreen --> SettingsTabs
+    SettingsScreen --> SettingsStore
+    SettingsTabs --> UIHandlers
+    UIHandlers --> SettingsStore
+    SettingsStore --> NVS["nvs_flash"]
+    SettingsStore --> Display
+```
+
+### 3.3 Tab 切换数据流
+
+```mermaid
+sequenceDiagram
+    participant User as 用户
+    participant Sidebar as Sidebar
+    participant Content as content_obj
+    participant Tabs as settings_tabs
+    participant Store as settings_store
+
+    User->>Sidebar: 点击 Display（当前在 System）
+    Sidebar->>Tabs: settings_tabs_collect(SYSTEM, buf)
+    Tabs->>Store: settings_store_update(buf)
+    Sidebar->>Sidebar: 更新选中高亮
+    Sidebar->>Content: lv_obj_clean(content_obj)
+    Sidebar->>Tabs: load_display_settings(content, store)
+    Tabs->>Content: 创建 slider/label
+    Tabs->>Store: 读取 brightness_pct 填充控件
+
+    User->>Sidebar: 点击 Save
+    Sidebar->>Tabs: settings_tabs_collect(active_tab, buf)
+    Tabs->>Store: settings_store_update(buf)
+    Store->>Store: settings_store_commit()
+    Store->>Store: settings_store_apply()
+```
+
+**Tab 切换前必须先 collect 当前 Tab 到内存**，否则未 Save 的控件改动会在 `lv_obj_clean` 后丢失。Save 仅 collect **当前 active Tab**，但 `settings_store_commit()` 持久化 **内存 struct 全部字段**（含其它 Tab 切换前已 collect 的值）。
+
+---
+
+## 4. 全局横屏基础设施（BSP）
+
+### 4.1 逻辑分辨率宏
+
+在 `main/bsp/board_config.h` 新增：
+
+```c
+/* Physical panel pixels (portrait wiring) */
+#define BOARD_LCD_H_RES          170
+#define BOARD_LCD_V_RES          320
+
+/* LVGL logical resolution after 90° rotation (landscape) */
+#define BOARD_LCD_LOGIC_H_RES    320
+#define BOARD_LCD_LOGIC_V_RES    170
+```
+
+UI 代码 **统一使用** `BOARD_LCD_LOGIC_H_RES` / `BOARD_LCD_LOGIC_V_RES` 作为屏幕尺寸。
+
+### 4.2 Display 旋转与 flush_cb
+
+在 `main/bsp/lvgl_port.c` 的 `lvgl_port_init()` 中，`lv_display_create` 之后添加：
+
+```c
+lv_display_t *display =
+    lv_display_create(BOARD_LCD_H_RES, BOARD_LCD_V_RES);
+
+lv_display_set_rotation(display, LV_DISPLAY_ROTATION_90);
+/* 逻辑分辨率：320×170 */
+```
+
+说明（依据 [LVGL 9.2 Display porting — Rotation](https://docs.lvgl.io/9.2/porting/display.html)）：
+
+- `lv_display_set_rotation()` **交换逻辑分辨率**（320×170），并变换 **触摸坐标**；**不会自动旋转像素**
+- 本项目无 ST7789 硬件 scan rotation，须走 **软件旋转** 路径
+- 当前为 `LV_DISPLAY_RENDER_MODE_PARTIAL`：LVGL 可能在内部按块旋转后再调用 `flush_cb`，**但必须在真机验证**；若画面仍呈竖屏或区域错位，在 `flush_cb` 中补充：
+
+```c
+lv_display_rotate_area(disp, (lv_area_t *)&rotated_area);
+lv_draw_sw_rotate(px_map, rotated_buf, src_w, src_h, src_stride, dst_stride,
+                  lv_display_get_rotation(disp), cf);
+/* 再将 rotated_buf / rotated_area 传给 esp_lcd_panel_draw_bitmap */
+```
+
+- 绘制 buffer 大小仍基于物理 `BOARD_LCD_H_RES × BOARD_LVGL_DRAW_BUF_LINES`；逻辑宽变为 320 后 partial 分块与软件旋转 **CPU 开销上升**，需关注刷新流畅度（见 §11）
+
+**Phase 1 步骤 1.2 验收：** 加载 Settings 页后，Sidebar 在左、Content 在右，文字可读，无镜像/错位。
+
+### 4.3 Panel Gap 与 flush 坐标
+
+物理面板为 240×320，有效显示区 170×320 居中，`display.c` 已通过 `esp_lcd_panel_set_gap(BOARD_LCD_GAP_X, 0)` 设置 **35px 水平偏移**（`BOARD_LCD_GAP_X = (240−170)/2`）。
+
+旋转 90° 后 gap 方向可能变化；若 `flush_cb` 需手动 `lv_draw_sw_rotate`，须同步验证：
+
+1. 画面是否整体偏移或裁切
+2. `lv_display_rotate_area` 输出坐标加上 gap offset 是否正确
+3. 四角触控是否与像素对齐
+
+**Phase 1 步骤 1.2/1.3 一并验收**，必要时在 flush 路径对 area 做 gap 补偿。
+
+### 4.4 Touch 坐标映射
+
+**原则：触摸驱动只做「物理竖屏面板」对齐；LVGL 负责 rotation 后的逻辑坐标变换。**
+
+- `esp_lcd_touch_config_t` 的 `x_max` / `y_max` **保持** 物理尺寸 170×320，不随逻辑横屏改变
+- `lv_indev_set_display(indev, display)` 关联 display 后，LVGL 9 会根据 `lv_display_set_rotation()` **在内部变换触摸点**
+- 因此 `swap_xy` / `mirror_x` / `mirror_y` **仅用于** 触摸 IC 原始坐标 → 物理面板（170×320、原点左上角）的对齐，**不得** 为了 90° 逻辑横屏在驱动层做 rotation 补偿，否则 **双重变换**
+
+**初始值（与当前 `touch.c` 一致，待真机验证）：**
+
+```c
+.flags = {
+    .swap_xy = 0,
+    .mirror_x = 0,
+    .mirror_y = 0,
+},
+```
+
+**校准步骤：**
+
+1. **先** 设 `lv_display_set_rotation(90°)`，**保持** touch flags 全 0，加载 Settings 页
+2. 在四个逻辑角点击，观察触控是否落在对应 UI 区域
+3. 若整体镜像或轴互换，**仅调整物理对齐 flags**（swap × mirror 共 8 种），每次改一项并记录
+4. 确认 Sidebar 左侧按钮可准确触控后，写入 `board_config.h`：
+
+```c
+#define BOARD_TOUCH_SWAP_XY      0   /* 真机确认值 */
+#define BOARD_TOUCH_MIRROR_X     0
+#define BOARD_TOUCH_MIRROR_Y     0
+```
+
+> 注释须标明：**物理面板对齐，非 LVGL 逻辑旋转**。
+
+### 4.5 现有 Screen 兼容
+
+| 屏幕 | 现状 | 横屏影响 | 处理阶段 |
+|------|------|----------|----------|
+| Screen1 日历 | 170×320 居中 | 布局错位 | Phase 3 重排或替换 |
+| Screen2 | SquareLine 生成 | 需验证 | Phase 3 |
+| Screen3 HID 控制 | 绝对坐标按钮 | 需重排 | Phase 3 |
+| **Settings** | 新建 | 按 320×170 设计 | **Phase 1** |
+
+Phase 1 建议将 `ui.c` 中 `lv_disp_load_scr()` 默认屏改为 `ui_Settings`，便于验收横屏与 Settings 功能。
+
+---
+
+## 5. Settings UI 规格
+
+### 5.1 屏幕骨架 API
+
+**`main/ui/screens/ui_Settings.h`**
+
+```c
+#pragma once
+#include "lvgl.h"
+#include "settings_types.h"
+
+extern lv_obj_t *ui_Settings;
+extern lv_obj_t *ui_Settings_sidebar;
+extern lv_obj_t *ui_Settings_content;
+
+void ui_Settings_screen_init(void);
+void ui_Settings_screen_destroy(void);
+
+/* 切换 Tab 时由 ui_handlers 调用 */
+void ui_Settings_switch_tab(settings_tab_t tab);
+settings_tab_t ui_Settings_get_active_tab(void);
+```
+
+**初始化伪代码：**
+
+```c
+void ui_Settings_screen_init(void)
+{
+    ui_Settings = lv_obj_create(NULL);
+    lv_obj_set_size(ui_Settings, BOARD_LCD_LOGIC_H_RES, BOARD_LCD_LOGIC_V_RES);
+    lv_obj_remove_flag(ui_Settings, LV_OBJ_FLAG_SCROLLABLE);
+
+    ui_Settings_sidebar = lv_list_create(ui_Settings);
+    lv_obj_set_size(ui_Settings_sidebar, 90, 170);
+    lv_obj_set_pos(ui_Settings_sidebar, 0, 0);
+    lv_obj_remove_flag(ui_Settings_sidebar, LV_OBJ_FLAG_SCROLLABLE);
+
+    /* 4 个导航 button + 事件 */
+    /* Save button 固定底部 */
+
+    ui_Settings_content = lv_obj_create(ui_Settings);
+    lv_obj_set_size(ui_Settings_content, 230, 170);
+    lv_obj_set_pos(ui_Settings_content, 90, 0);
+    lv_obj_remove_flag(ui_Settings_content, LV_OBJ_FLAG_SCROLLABLE);
+
+    settings_store_load();
+    settings_store_apply();   /* 启动时恢复 NVS 背光等到硬件 */
+    load_system_settings(ui_Settings_content, settings_store_get());
+}
+```
+
+### 5.2 各 Tab MVP 内容
+
+#### System Tab
+
+| 控件 | LVGL 类型 | 数据字段 | 行为 |
+|------|-----------|----------|------|
+| Enable Notification | `lv_switch` | `notification_enabled` | `VALUE_CHANGED` 时更新内存；Tab 切换前 collect；Save 时 commit |
+| Factory Reset | `lv_button` | — | 确认后 `settings_store_factory_reset()` + `esp_restart()` |
+
+StatusBar 标题：`"System Settings"`
+
+#### Display Tab
+
+| 控件 | LVGL 类型 | 数据字段 | 行为 |
+|------|-----------|----------|------|
+| Brightness | `lv_slider` (0–100) + `%` label | `brightness_pct` | `VALUE_CHANGED` 时：`settings_store` 更新内存 + `settings_store_apply()` 实时调背光；Save 时 commit |
+
+StatusBar 标题：`"Display Settings"`
+
+#### Audio Tab
+
+| 控件 | LVGL 类型 | 数据字段 | 行为 |
+|------|-----------|----------|------|
+| Volume | `lv_slider` (0–100) | `volume_pct` | `VALUE_CHANGED` 更新内存；Phase 1 无 codec 输出 |
+| Mute | `lv_switch` | `mute` | `VALUE_CHANGED` 更新内存；Phase 1 无 codec 输出 |
+
+StatusBar 标题：`"Audio Settings"`
+
+#### Network Tab
+
+| 控件 | LVGL 类型 | 行为 |
+|------|-----------|------|
+| WiFi Status | `lv_label` | 显示 `"WiFi: Disabled"`（`BOARD_WIFI_ENABLED=0`） |
+| Scan | `lv_button` | Phase 1 点击显示 `"Not available"` 日志；Phase 4 接 `wifi_manager` |
+
+StatusBar 标题：`"Network Settings"`
+
+### 5.3 Tab 加载函数
+
+**`main/ui/settings/settings_tabs.h`**
+
+```c
+#pragma once
+#include "lvgl.h"
+#include "settings_types.h"
+
+void load_system_settings(lv_obj_t *content, const settings_data_t *data);
+void load_display_settings(lv_obj_t *content, const settings_data_t *data);
+void load_audio_settings(lv_obj_t *content, const settings_data_t *data);
+void load_network_settings(lv_obj_t *content, const settings_data_t *data);
+
+/* Save / Tab 切换前：从指定 Tab 控件回读到 out（out 应先拷贝 settings_store_get()） */
+void settings_tabs_collect(settings_tab_t tab, settings_data_t *out);
+```
+
+每次切换 Tab（**先 collect 再 clean**）：
+
+```c
+void ui_Settings_switch_tab(settings_tab_t tab)
+{
+    settings_data_t buf = *settings_store_get();
+    settings_tabs_collect(s_active_tab, &buf);
+    settings_store_update(&buf);
+
+    s_active_tab = tab;
+    sidebar_update_highlight(tab);
+    lv_obj_clean(ui_Settings_content);
+    switch (tab) {
+    case SETTINGS_TAB_SYSTEM:
+        load_system_settings(ui_Settings_content, settings_store_get());
+        break;
+    case SETTINGS_TAB_DISPLAY:
+        load_display_settings(ui_Settings_content, settings_store_get());
+        break;
+    case SETTINGS_TAB_AUDIO:
+        load_audio_settings(ui_Settings_content, settings_store_get());
+        break;
+    case SETTINGS_TAB_NETWORK:
+        load_network_settings(ui_Settings_content, settings_store_get());
+        break;
+    default:
+        LV_ASSERT_MSG(false, "unexpected settings_tab_t");
+        break;
+    }
+}
+```
+
+### 5.4 样式规范
+
+在 `ui_Settings.c` 内使用 static `lv_style_t`（或 `settings_style.c`）：
+
+| 元素 | 属性 | 值 |
+|------|------|-----|
+| Sidebar 按钮（默认） | 宽×高 | 86×28 |
+| Sidebar 按钮（选中） | 背景色 | `lv_palette_main(LV_PALETTE_BLUE)` |
+| Content 背景 | 背景色 | `lv_palette_lighten(LV_PALETTE_GREY, 2)` |
+| StatusBar 分隔线 | 高度 1px | bottom border 或 `lv_obj` 线 |
+| Slider | 宽 | 100–120px |
+| Factory Reset 按钮 | 文字色 | `lv_palette_main(LV_PALETTE_RED)` |
+
+**Style 生命周期：** 使用文件级 static style，在 `ui_Settings_screen_init()` 初始化一次；`lv_obj_clean(content)` 仅删除子对象，不删除 static style，避免泄漏。
+
+### 5.5 StatusBar 时间
+
+| 阶段 | 行为 |
+|------|------|
+| Phase 1 | 静态占位 `"--:--"` |
+| Phase 4 | SNTP 同步后 `lv_label_set_text_fmt()` 每分钟更新 |
+
+---
+
+## 6. 数据模型与 NVS
+
+### 6.1 类型定义
+
+**`main/ui/settings/settings_types.h`**
+
+```c
+#pragma once
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef enum {
+    SETTINGS_TAB_SYSTEM = 0,
+    SETTINGS_TAB_DISPLAY,
+    SETTINGS_TAB_AUDIO,
+    SETTINGS_TAB_NETWORK,
+} settings_tab_t;
+
+typedef struct {
+    bool     notification_enabled;
+    uint8_t  brightness_pct;       /* 0–100, default 70 */
+    uint8_t  volume_pct;           /* 0–100, default 50 */
+    bool     mute;
+} settings_data_t;
+```
+
+### 6.2 默认值
+
+| 字段 | 默认值 | 说明 |
+|------|--------|------|
+| `notification_enabled` | `false` | 与 mockup 一致，默认关闭 |
+| `brightness_pct` | `70` | 与 mockup 一致 |
+| `volume_pct` | `50` | 居中 |
+| `mute` | `false` | — |
+
+```c
+static const settings_data_t SETTINGS_DEFAULTS = {
+    .notification_enabled = false,
+    .brightness_pct = 70,
+    .volume_pct = 50,
+    .mute = false,
+};
+```
+
+### 6.3 NVS Schema
+
+| 属性 | 值 |
+|------|-----|
+| Namespace | `"settings"` |
+| 存储格式 | 各 key 独立 u8/blob，便于单项迁移 |
+
+| Key | 类型 | 字段 | 说明 |
+|-----|------|------|------|
+| `"notif"` | `uint8_t` | `notification_enabled` | 0/1 |
+| `"bright"` | `uint8_t` | `brightness_pct` | 0–100 |
+| `"vol"` | `uint8_t` | `volume_pct` | 0–100 |
+| `"mute"` | `uint8_t` | `mute` | 0/1 |
+
+### 6.4 Store API
+
+**`main/ui/settings/settings_store.h`**
+
+```c
+#pragma once
+#include "settings_types.h"
+
+void settings_store_load(void);
+const settings_data_t *settings_store_get(void);
+void settings_store_update(const settings_data_t *data);
+esp_err_t settings_store_commit(void);
+esp_err_t settings_store_factory_reset(void);
+void settings_store_apply(void);   /* 将内存值应用到硬件（背光等） */
+```
+
+| 函数 | 说明 |
+|------|------|
+| `settings_store_load` | 启动时从 NVS 读取；key 不存在则用 `SETTINGS_DEFAULTS` |
+| `settings_store_get` | 返回内存中当前 struct 指针（只读） |
+| `settings_store_update` | 用 collect 结果更新内存 struct（collect 前应先 `*out = *settings_store_get()`） |
+| `settings_store_commit` | 将全部字段写入 NVS |
+| `settings_store_factory_reset` | 擦除 `"settings"` namespace，恢复默认值，commit |
+| `settings_store_apply` | 调用 `display_backlight_set_brightness()` 等即时生效项 |
+
+### 6.5 Save 流程
+
+```mermaid
+sequenceDiagram
+    participant User
+    participant SaveBtn
+    participant Tabs as settings_tabs
+    participant Store as settings_store
+    participant NVS
+    participant HW as display.c
+
+    User->>SaveBtn: 点击 Save
+    SaveBtn->>Tabs: settings_tabs_collect(active_tab, buf)
+    Tabs->>Store: settings_store_update(buf)
+    Store->>NVS: settings_store_commit()
+    Store->>HW: settings_store_apply()
+    SaveBtn->>User: 可选：短暂 toast "Saved"
+```
+
+**注意：**
+
+- Display Tab 亮度在 `VALUE_CHANGED` 时已通过 `settings_store_apply()` 实时调背光并更新内存；Save 负责写入 NVS
+- 跨 Tab 修改：切换 Tab 时 collect 当前 Tab 到内存；最终 Save 一次 commit 全部字段
+- 背光等硬件调用统一经 `settings_store_apply()`，**不** 在 `settings_tabs.c` 直接调用 `display.c`（见 §7.1）
+
+### 6.6 Factory Reset 流程
+
+1. 用户点击 Factory Reset 按钮
+2. Phase 1 无确认对话框，直接执行（Phase 2 可选加 `lv_msgbox` 确认，见 §8）
+3. 调用 `settings_store_factory_reset()`：擦除 NVS namespace，恢复 `SETTINGS_DEFAULTS`
+4. 调用 `settings_store_apply()` 恢复背光
+5. `esp_restart()`
+
+---
+
+## 7. 事件与集成
+
+### 7.1 事件归属
+
+| 事件 | 注册位置 | 处理函数（`ui_handlers.c`） |
+|------|----------|----------------------------|
+| Sidebar Tab 点击 | `ui_Settings.c` init | `settings_on_tab_clicked()` |
+| Save 点击 | `ui_Settings.c` init | `settings_on_save_clicked()` |
+| Factory Reset | `settings_tabs.c` 创建时 | `settings_on_factory_reset()` |
+| Brightness slider | `settings_tabs.c` 创建时 | `settings_on_brightness_changed()` → 更新 store + `settings_store_apply()` |
+| 其他 slider/switch | 各 load 函数 | `settings_on_value_changed()` → 更新 store 内存 |
+
+**原则：** Settings 相关回调一律放在 `main/app/ui_handlers.c`，**不修改** SquareLine 生成的 `ui_events.c`。硬件侧效应（背光）经 `settings_store_apply()`，UI 层不直接 `#include "display.h"`。
+
+### 7.2 CMakeLists.txt 变更
+
+在 `main/CMakeLists.txt` 的 `SRCS` 中添加：
+
+```text
+"ui/screens/ui_Settings.c"
+"ui/settings/settings_store.c"
+"ui/settings/settings_tabs.c"
+```
+
+### 7.3 ui.h / ui.c 变更
+
+```c
+/* ui.h */
+#include "screens/ui_Settings.h"
+
+/* ui_init() */
+ui_Settings_screen_init();
+/* Phase 1 默认屏（LVGL 9 亦可写 lv_screen_load(ui_Settings)） */
+lv_disp_load_scr(ui_Settings);
+
+/* ui_destroy() */
+ui_Settings_screen_destroy();
+```
+
+### 7.4 初始化顺序
+
+在 `app_main.c` 中保持现有顺序，Settings 无额外要求：
+
+```text
+nvs_flash_init → display_init → lvgl_port_init → touch_init → ui_init → ui_handlers_init
+```
+
+`settings_store_load()` 与 `settings_store_apply()` 在 `ui_Settings_screen_init()` 内调用（NVS 已就绪），确保重启后背光等与 NVS 一致。
+
+---
+
+## 8. 实现步骤
+
+### 阶段 0：规格审核
+
+| 步骤 | 内容 | 状态 |
+|------|------|------|
+| 0.1 | 审核本文档 v1.2 | 完成 |
+| 0.2 | 确认横屏全局策略与 Tab MVP 范围 | 待确认 |
+
+### 阶段 1：BSP 横屏 + Settings 全量 MVP
+
+| 步骤 | 内容 |
+|------|------|
+| 1.1 | `board_config.h` 增加逻辑分辨率宏、touch 对齐宏 |
+| 1.2 | `lvgl_port.c`：`lv_display_set_rotation(90°)`；真机验证 flush，必要时 `lv_draw_sw_rotate` + gap 补偿 |
+| 1.3 | `touch.c`：物理面板对齐 flags 真机验证（勿与 LVGL rotation 双重变换） |
+| 1.4 | 新建 `settings_types.h`、`settings_store.c`（含 `apply`） |
+| 1.5 | 新建 `ui_Settings.c`：Sidebar + Content + Save |
+| 1.6 | 新建 `settings_tabs.c`：四个 `load_xxx_settings()` + `settings_tabs_collect()` |
+| 1.7 | `ui_handlers.c`：Tab 切换（先 collect）、Save、Factory Reset、slider/switch 回调 |
+| 1.8 | 更新 `CMakeLists.txt`、`ui.c`、`ui.h` |
+| 1.9 | 默认加载 Settings 页，真机验收 §10 全部 AC |
+
+**Phase 1 验收：** 与 §1.2 MVP 及 §10 验收标准 AC-1～AC-8 一致（含四个 Tab、Display 亮度、跨 Tab Save、Factory Reset）。
+
+### 阶段 2：体验增强（可选，非 MVP 阻塞）
+
+| 步骤 | 内容 |
+|------|------|
+| 2.1 | Factory Reset `lv_msgbox` 确认对话框 |
+| 2.2 | Save 成功 toast / 视觉反馈 |
+| 2.3 | Sidebar / Tab 切换过渡动画 |
+
+### 阶段 3：现有 Screen 横屏适配
+
+| 步骤 | 内容 |
+|------|------|
+| 3.1 | Screen3 HID 控制页按 320×170 重排 |
+| 3.2 | Screen1/2 适配或废弃 |
+| 3.3 | 多 Screen 导航入口（如 Settings 返回主屏） |
+
+### 阶段 4：增强功能（后续）
+
+| 步骤 | 内容 |
+|------|------|
+| 4.1 | SNTP 时间显示 |
+| 4.2 | 通知功能真实实现 |
+| 4.3 | WiFi 扫描/连接 UI（`BOARD_WIFI_ENABLED=1`） |
+| 4.4 | Audio codec 对接 |
+| 4.5 | Factory Reset 确认对话框（若未在 Phase 2 完成） |
+
+---
+
+## 9. 与现有代码对应关系
+
+| 现有 | Settings 实施后 |
+|------|-----------------|
+| `lv_display_create(170, 320)` | 不变物理尺寸 + `set_rotation(90°)`；flush 可能需软件旋转 |
+| `ui_Screen3` 默认启动 | Phase 1 改为 `ui_Settings`；Phase 3 增加导航 |
+| `ui_events.c` SquareLine 回调 | 不修改；Settings 事件放 `ui_handlers.c` |
+| `display_backlight_set_brightness()` | 经 `settings_store_apply()` 调用，不在 UI Tab 层直接调用 |
+| `nvs_flash` 已初始化 | Settings 使用独立 namespace `"settings"` |
+| `wifi_manager.c` | Network Tab Phase 4 对接 |
+| SquareLine Screen1/2/3 | Phase 3 适配，Settings 不纳入 SquareLine |
+
+---
+
+## 10. 验收标准
+
+| 编号 | 验收项 | 标准 |
+|------|--------|------|
+| AC-1 | 逻辑分辨率 | LVGL 屏幕 320×170，Sidebar 90px + Content 230px |
+| AC-2 | 触摸 | 四角及 Sidebar 按钮触控准确，无误触 |
+| AC-3 | Tab 切换 | 4 个 Tab 可切换，右侧内容正确刷新，无滚动条 |
+| AC-4 | System Tab | Switch/Factory Reset 可交互 |
+| AC-5 | Display Tab | 亮度 slider 实时改变背光 |
+| AC-6 | Save | 跨 Tab 修改后 Save，重启后全部设置值从 NVS 恢复 |
+| AC-7 | Factory Reset | 恢复默认值、背光恢复 70%、设备重启 |
+| AC-8 | 内存 | Tab 反复切换 50 次无 crash、无显著内存增长 |
+
+---
+
+## 11. 风险与约束
+
+1. **flush 软件旋转**：`lv_display_set_rotation` 不保证自动旋转像素；须真机验证，必要时改 `flush_cb`（§4.2）。
+2. **触摸校准**：区分物理对齐与 LVGL rotation；错误地在 touch 驱动层做 rotation 补偿会导致双重变换（§4.4）。
+3. **Panel gap**：240 宽面板 170 有效区居中，旋转后须验证 offset（§4.3）。
+4. **Partial 模式性能**：逻辑宽 320 + 软件旋转增加 CPU 负担，若卡顿可考虑增大 `BOARD_LVGL_DRAW_BUF_LINES` 或后续评估 DIRECT 模式。
+5. **SquareLine 冲突**：Settings 手写 C，不纳入 SquareLine 工程；重新导出 UI 时不应覆盖 `ui_Settings.c` 与 `ui_handlers.c` 中 Settings 部分。
+6. **WiFi 默认关闭**：Network Tab Phase 1 仅为占位，避免用户误解为已连网。
+7. **170px 高度**：控件过多时需合并 Tab 或减小行高，禁止启用纵向滚动。
+8. **Style 生命周期**：Tab 切换使用 `lv_obj_clean` 而非 `lv_obj_del` 整个 content；static style 不可绑定到会被删除的对象上。
+9. **跨 Tab 数据**：Tab 切换前必须 collect；slider/switch 的 `VALUE_CHANGED` 应同步内存，避免 UI 与硬件不一致。
+10. **Factory Reset 范围**：Phase 1 仅擦除 `"settings"` namespace；BLE bonding、快捷键等其它 NVS namespace（见 `ble-hid-keyboard.md` 规划）保留。
+11. **Screen 兼容**：Phase 1 默认 Settings 页会导致 Screen1/2/3 暂不可直接验收，属预期行为。
+
+---
+
+## 12. 参考
+
+- 板级配置：`main/bsp/board_config.h`
+- LVGL Port：`main/bsp/lvgl_port.c`
+- 背光 API：`main/bsp/display.h`
+- 现有 UI 入口：`main/ui/ui.c`
+- 事件处理范例：`main/app/ui_handlers.c`
+- 姊妹规格：`docs/spec/ble-hid-keyboard.md`
+- LVGL 9.2 Display Rotation：[porting/display.html — Rotation](https://docs.lvgl.io/9.2/porting/display.html)
+- LVGL API：`lv_display_set_rotation()`、`lv_display_rotate_area()`、`lv_draw_sw_rotate()`
+
+---
+
+## 修订记录
+
+| 版本 | 日期 | 说明 |
+|------|------|------|
+| 1.0 | 2026-07-05 | 初版：Settings 横屏 320×170 布局、BSP、NVS、分阶段实现规格 |
+| 1.1 | 2026-07-05 | 移除语言选择（dropdown / NVS lang / settings_language_t） |
+| 1.2 | 2026-07-05 | 技术修订：统一 Tab 线框与 MVP 范围；修正 LVGL 9 flush/touch 旋转说明；Tab 切换先 collect；启动 apply 背光；补 gap/分层/跨 Tab Save 约束 |

docs/spec/shake-nav-screen.md

@@ -0,0 +1,668 @@
+# 摇一摇切换页面实现规格
+
+> 项目：HeavenlyHeroStar  
+> 目标芯片：ESP32-S3  
+> ESP-IDF：6.0.1  
+> LVGL：9.2.2  
+> 逻辑分辨率：320×170（全局横屏）  
+> IMU：QMI8658（3 轴加速度 + 3 轴陀螺仪）  
+> 状态：待实现（v1.0 初稿）
+
+## 1. 背景与目标
+
+### 1.1 现状
+
+板载 QMI8658 六轴 IMU 已在硬件文档中定义，固件侧尚未接入；UI 层四屏已创建但无页面路由机制。
+
+| 模块 | 路径 | 说明 |
+|------|------|------|
+| IMU 硬件 | `README.md` | QMI8658，I2C SDA=IO8 / SCL=IO7，INT1=IO6 / INT2=IO15 |
+| 板级配置 | `main/bsp/board_config.h` | **无** IMU 引脚宏；触摸使用 `I2C_NUM_0`（IO47/48） |
+| 触摸 I2C | `main/bsp/touch.c` | CST816S，`i2c_master_bus` 独占 `I2C_NUM_0` |
+| UI 屏幕 | `main/ui/ui.c` | 启动时创建 Screen1/2/3 + Settings，默认 `lv_disp_load_scr(ui_Settings)` |
+| 页面路由 | — | **不存在**；`_ui_screen_change()` 在 `ui_helpers.c` 中已实现但未被调用 |
+| LVGL 线程 | `main/bsp/lvgl_port.c` | 独立 task + `_lock`；外部改 UI 须 `lvgl_port_lock()` |
+| Settings | `main/ui/settings/` | `settings_data_t` **无** motion 字段；NVS namespace `"settings"` |
+| 事件处理 | `main/app/ui_handlers.c` | HID / Settings 回调；无 IMU / 导航逻辑 |
+| IMU 驱动 | — | 仓库内无 QMI8658 组件或 `main/bsp/imu.c` |
+
+### 1.2 目标
+
+通过 **摇一摇** 在四屏之间循环切换，作为触摸与物理按键之外的第三种导航方式。
+
+**已确认产品决策：**
+
+| 决策项 | 结论 |
+|--------|------|
+| 参与轮播的页面 | **Settings + Screen1 + Screen2 + Screen3** 四屏循环 |
+| 手势映射 | **任意方向摇一次 → 下一页**（MVP 不做左/右方向区分） |
+| 默认轮播顺序 | `Settings → Screen1 → Screen2 → Screen3 → Settings` |
+| Settings 页行为 | 在 Settings 时摇一摇同样切到 Screen1（不因当前在设置页而禁用） |
+
+**首版（MVP）交付：**
+
+- QMI8658 BSP 驱动 + 100 Hz 加速度采样（轮询）
+- 摇一摇检测：去重力合成幅值 + 阈值 + 时间窗 + cooldown
+- `ui_nav` 模块：循环切下一屏，fade 动画
+- System Tab：「Shake Navigation」开关 + 灵敏度档位（低/中/高）
+- NVS 持久化；Factory Reset 恢复 motion 默认值
+- 线程安全：IMU task → Queue → `ui_nav_next()`（内部 `lvgl_port_lock`）
+
+**后续阶段（非 MVP 阻塞）：**
+
+- INT1 Data Ready 中断，降低 CPU 轮询与功耗
+- `ui_nav_prev()` 与方向性摇一摇
+- 切页页码指示（dot indicator）
+- Screen1/2/3 横屏布局完善（见 `settings-screen-landscape.md` Phase 3）
+
+### 1.3 方案选型结论
+
+| 方案 | 说明 | 结论 |
+|------|------|------|
+| A | 仅陀螺仪积分判摇 | 零偏漂移大，不采用 |
+| **B** | **加速度去重力 + 合成幅值峰值** | **MVP 采用** |
+| C | QMI8658 内置 Wake-on-Motion 硬件判摇 | Phase 4 省电优化 |
+| D | IMU task 内直接调用 `lv_screen_load_anim()` | 线程不安全，**禁止** |
+| **E** | **FreeRTOS Queue → nav task → `lvgl_port_lock` 切屏** | **采用**（模式参考 `boot_button.c`） |
+| F | esp_event 总线投递 `UI_NAV_NEXT` | 可选，与 Queue 等价；MVP 用 Queue 即可 |
+
+---
+
+## 2. 硬件与 BSP
+
+### 2.1 引脚与总线
+
+来源：`README.md` 外围接口表。
+
+| 信号 | GPIO | 说明 |
+|------|------|------|
+| IMU_SDA | IO8 | I2C 数据线 |
+| IMU_SCL | IO7 | I2C 时钟线 |
+| IMU_INT1 | IO6 | 中断 1（Phase 4：Data Ready / Motion） |
+| IMU_INT2 | IO15 | 中断 2（Phase 4：备用） |
+
+**I2C 总线隔离：** 触摸已占用 `I2C_NUM_0`（`main/bsp/touch.c`）。IMU **必须**使用独立总线，建议 `I2C_NUM_1`，避免与 CST816 争用或地址冲突时的 bus 锁问题。
+
+### 2.2 board_config.h 新增宏
+
+```c
+/* IMU I2C (QMI8658) */
+#define BOARD_IMU_I2C_NUM        I2C_NUM_1
+#define BOARD_PIN_IMU_SDA        8
+#define BOARD_PIN_IMU_SCL        7
+#define BOARD_PIN_IMU_INT1       6
+#define BOARD_PIN_IMU_INT2       15
+#define BOARD_IMU_I2C_FREQ_HZ    400000
+#define BOARD_IMU_ENABLED        1
+```
+
+### 2.3 imu.c / imu.h 职责
+
+新建 `main/bsp/imu.c`、`main/bsp/imu.h`：
+
+| API | 说明 |
+|-----|------|
+| `esp_err_t imu_init(void)` | 初始化 I2C bus + QMI8658 芯片 |
+| `esp_err_t imu_read_accel(float *ax, *ay, *az)` | 读取加速度，单位 **g**（±8g 量程） |
+| `esp_err_t imu_read_gyro(...)` | Phase 4 可选；MVP 可不实现 |
+| `void imu_start_task(imu_sample_cb_t cb)` | 100 Hz 采样循环，回调 `motion_gesture` |
+
+**初始化序列（MVP）：**
+
+1. `i2c_new_master_bus()` — 模式参考 `touch.c`
+2. 读 WHO_AM_I，期望值 **`0x05`**（实现前对照 QMI8658A 数据手册确认）
+3. 软复位 → 配置 acc：±8g，ODR **100 Hz**
+4. 启动 `imu_task`（10 ms 周期读数，或按 ODR 对齐）
+
+Phase 1 采用 **轮询**；INT1/INT2 在 Phase 4 启用。
+
+### 2.4 QMI8658 寄存器（MVP 最小集）
+
+> 完整寄存器表以实现阶段对照厂商数据手册为准；下表为 spec 占位，便于 Phase 1 编码。
+
+| 寄存器 | 地址 | MVP 用途 |
+|--------|------|----------|
+| WHO_AM_I | 0x00 | 设备识别 |
+| CTRL1 | 0x02 | 软复位 / 使能 |
+| CTRL2 | 0x03 | acc 量程、ODR |
+| ACC_X_L … ACC_Z_H | 0x35–0x3A | 6 字节 burst 读 |
+
+I2C 7-bit 地址：**`0x6B`**（SDO 默认；若硬件拉低则为 `0x6A`，真机确认）。
+
+### 2.5 坐标系与轴映射
+
+IMU 芯片坐标系与 PCB 安装方向、LVGL 横屏逻辑坐标 **不一定一致**。MVP 算法使用 **合成幅值**（与轴无关），不依赖单轴方向；Phase 4 若做方向性摇一摇再建立映射表。
+
+**真机标定步骤（Phase 2 验收）：**
+
+1. 设备平放静止 2 s，串口打印 `ax, ay, az`，确认合成幅值 ≈ 1g
+2. 分别沿 X/Y/Z 快速平移，确认对应轴响应最大
+3. 记录 `g_ref` baseline，写入 `motion_gesture` 启动校准
+
+---
+
+## 3. 系统架构
+
+### 3.1 模块划分
+
+```text
+main/bsp/
+├── board_config.h           # IMU 引脚 / I2C 宏
+├── imu.c / imu.h            # I2C + QMI8658 驱动 + imu_task
+
+main/app/
+├── ui_nav.c / ui_nav.h      # 屏幕轮播状态机
+├── motion_gesture.c / .h    # 摇一摇检测、cooldown、配置同步
+└── ui_handlers.c            # 可选：nav 事件注册
+
+main/ui/settings/
+├── settings_types.h         # shake_nav_enabled, shake_sensitivity
+├── settings_store.c         # NVS shake_en / shake_sens
+└── settings_tabs.c          # System Tab 新增控件
+
+main/app/app_main.c          # 初始化顺序扩展
+main/CMakeLists.txt          # 追加源文件
+```
+
+### 3.2 架构图
+
+```mermaid
+flowchart TB
+    subgraph bsp [BSP Layer]
+        IMU["imu.c"]
+    end
+
+    subgraph app [App Layer]
+        Gesture["motion_gesture.c"]
+        Nav["ui_nav.c"]
+        Queue["nav_queue"]
+    end
+
+    subgraph ui [UI Layer]
+        Screens["ui_Settings / Screen1/2/3"]
+        Store["settings_store.c"]
+    end
+
+    subgraph lvgl [LVGL Port]
+        Lock["lvgl_port_lock"]
+        LVGLTask["lvgl_port_task"]
+    end
+
+    IMU -->|"100Hz samples"| Gesture
+    Store -->|"apply enabled/sens"| Gesture
+    Gesture -->|"UI_NAV_NEXT"| Queue
+    Queue --> Nav
+    Nav --> Lock
+    Lock --> Screens
+    Screens --> LVGLTask
+```
+
+### 3.3 摇一摇切页时序
+
+```mermaid
+sequenceDiagram
+    participant User as 用户
+    participant IMU as imu_task
+    participant Gesture as motion_gesture
+    participant Queue as nav_queue
+    participant Nav as ui_nav
+    participant LVGL as lvgl_port_task
+
+    User->>IMU: 摇晃设备
+    IMU->>Gesture: accel sample 100Hz
+    Gesture->>Gesture: mag > threshold + min_samples
+    Gesture->>Gesture: cooldown check + enabled check
+    Gesture->>Queue: UI_NAV_NEXT
+    Queue->>Nav: ui_nav_next()
+    Nav->>LVGL: lvgl_port_lock()
+    Nav->>LVGL: lv_screen_load_anim next screen
+    Nav->>LVGL: lvgl_port_unlock()
+    LVGL->>User: 显示下一页
+```
+
+**线程间通信：** 参考 `main/bsp/boot_button.c` 的 `GPIO ISR → xQueueSend → dedicated task` 模式；`motion_gesture` 检测到 shake 后向 `nav_queue` 投递事件，由 `nav_handler_task` 调用 `ui_nav_next()`。
+
+---
+
+## 4. 摇一摇检测算法
+
+### 4.1 信号处理
+
+1. **Baseline 校准：** 启动后 500 ms 内设备保持静止，采集加速度均值 `g_ref`（3 轴）
+2. **动态量：** `a_dyn = a_raw - g_ref`
+3. **合成幅值：** `mag = sqrt(ax² + ay² + az²)`（`ax/ay/az` 为 `a_dyn` 分量）
+
+可选替代（Phase 4）：一阶低通 `a_lp` + 高通 `a_hp = a_raw - a_lp`，对缓慢倾斜更不敏感。
+
+### 4.2 判定状态机
+
+```text
+                    mag > threshold
+         ┌──────────────────────────────┐
+         │                              │
+         v                              │
+      ┌──────┐   连续 ≥ min_samples    ┌─────────────────┐
+      │ IDLE │ ──────────────────────> │ SHAKE_DETECTED  │
+      └──────┘                           └────────┬────────┘
+         ^                                        │
+         │              cooldown_ms 到期            │
+         └────────────────────────────────────────┘
+                              │
+                              v
+                    post UI_NAV_NEXT（若 enabled）
+```
+
+**规则：**
+
+- 仅在 `SHAKE_DETECTED` 上升沿投递 **一次** `UI_NAV_NEXT`
+- `cooldown_ms` 内忽略后续峰值，防止一次猛摇连切多页
+- `shake_nav_enabled == false` 时状态机仍可运行，但不投递事件
+
+### 4.3 默认参数
+
+| 参数 | 默认值 | 说明 |
+|------|--------|------|
+| `sample_rate` | 100 Hz | acc ODR，与 imu_task 一致 |
+| `threshold` | 0.8 g | 合成幅值阈值 |
+| `threshold_low` | 0.6 g | 灵敏度 Low |
+| `threshold_med` | 0.8 g | 灵敏度 Med（默认） |
+| `threshold_high` | 1.0 g | 灵敏度 High |
+| `window_ms` | 300 ms | 超阈值须在此窗口内形成有效峰值 |
+| `min_samples` | 5 | 连续超阈值样本数（100 Hz 下 ≈ 50 ms） |
+| `cooldown_ms` | 800 ms | 两次有效摇一摇最小间隔 |
+| `calibration_ms` | 500 ms | 启动 baseline 采集时长 |
+
+### 4.4 motion_gesture API
+
+```c
+typedef enum {
+    MOTION_NAV_NEXT = 0,
+} motion_nav_event_t;
+
+typedef void (*motion_nav_cb_t)(motion_nav_event_t event);
+
+void motion_gesture_init(motion_nav_cb_t cb);
+void motion_gesture_set_enabled(bool enabled);
+void motion_gesture_set_sensitivity(shake_sensitivity_t sens);
+void motion_gesture_on_sample(float ax_g, float ay_g, float az_g);
+```
+
+`motion_gesture_on_sample()` 由 `imu_task` 每样本调用；内部维护状态机与 cooldown 计时。
+
+### 4.5 误触与边界
+
+| 场景 | MVP 策略 |
+|------|----------|
+| 敲桌面 | 提高 threshold 或选 Med/High 灵敏度 |
+| 线缆拉扯 | cooldown 防止连切 |
+| 手持走路 | 可能误触；Phase 4 可加「须从 IDLE 静止 ≥ 200 ms 才武装」 |
+| Settings 调 slider 时轻微抖动 | 合成幅值阈值通常高于手指微动 |
+
+---
+
+## 5. UI 页面导航（ui_nav）
+
+### 5.1 屏幕注册表
+
+轮播顺序与 §1.2 一致：
+
+```c
+#include "screens/ui_Settings.h"
+#include "screens/ui_Screen1.h"
+#include "screens/ui_Screen2.h"
+#include "screens/ui_Screen3.h"
+
+static lv_obj_t * const s_nav_screens[] = {
+    ui_Settings,
+    ui_Screen1,
+    ui_Screen2,
+    ui_Screen3,
+};
+
+#define NAV_SCREEN_COUNT  (sizeof(s_nav_screens) / sizeof(s_nav_screens[0]))
+```
+
+索引：0=Settings，1=Screen1，2=Screen2，3=Screen3。
+
+### 5.2 公开 API
+
+```c
+void ui_nav_init(void);
+void ui_nav_next(void);              /* 线程安全：内部 lvgl_port_lock */
+void ui_nav_prev(void);              /* Phase 4 预留；MVP 不实现 */
+void ui_nav_goto(uint8_t index);     /* 可选：调试 / 恢复索引 */
+
+lv_obj_t *ui_nav_current(void);
+uint8_t ui_nav_current_index(void);
+const char *ui_nav_current_name(void); /* 日志用："Settings"/"Screen1"/... */
+```
+
+### 5.3 切屏实现
+
+- 使用现有 `_ui_screen_change()`（`main/ui/ui_helpers.c`）或等价 `lv_screen_load_anim()`
+- 动画：`LV_SCR_LOAD_ANIM_FADE_IN`，时长 **300 ms**，delay **0**
+- `ui_nav_next()`：`index = (index + 1) % NAV_SCREEN_COUNT`
+- 内部流程：
+
+```c
+void ui_nav_next(void)
+{
+    lvgl_port_lock();
+    s_nav_index = (s_nav_index + 1) % NAV_SCREEN_COUNT;
+    lv_obj_t **target = (lv_obj_t **)&s_nav_screens[s_nav_index];
+    _ui_screen_change(target, LV_SCR_LOAD_ANIM_FADE_IN, 300, 0, NULL);
+    lvgl_port_unlock();
+}
+```
+
+> 注：`s_nav_screens` 元素在 `ui_init()` 后已非 NULL，`_ui_screen_change` 的 `target_init` 传 `NULL` 即可。
+
+### 5.4 与 Settings Tab 的边界
+
+| 行为 | 说明 |
+|------|------|
+| 摇一摇切屏 | 切换 **LVGL Screen**（整屏），不切换 Settings 内 Sidebar Tab |
+| Settings 内 Tab | 仍仅由 Sidebar 点击切换；遵循 `settings-screen-landscape.md` §3.3「切换 Tab 前先 collect」 |
+| 摇离 Settings | **不**自动 `settings_tabs_collect()`；内存 struct 保留未 Save 的改动（与现有跨 Tab 行为一致） |
+| 从 Settings 摇一摇 | 下一屏为 **Screen1** |
+
+### 5.5 Phase 1 无 IMU 时的验证路径
+
+在 `ui_nav` 就绪后、IMU 驱动完成前，将 **BOOT 键** 或 **KEY_IO（GPIO4）** 短按映射为 `ui_nav_next()`，验证四屏轮播与 fade 动画，不阻塞 Phase 2。
+
+---
+
+## 6. 数据模型与 NVS
+
+### 6.1 类型扩展
+
+在 `main/ui/settings/settings_types.h` 追加：
+
+```c
+typedef enum {
+    SHAKE_SENS_LOW = 0,
+    SHAKE_SENS_MED,
+    SHAKE_SENS_HIGH,
+} shake_sensitivity_t;
+
+typedef struct {
+    bool notification_enabled;
+    uint8_t brightness_pct;
+    uint8_t volume_pct;
+    bool mute;
+    bool shake_nav_enabled;              /* 默认 true */
+    shake_sensitivity_t shake_sensitivity; /* 默认 SHAKE_SENS_MED */
+} settings_data_t;
+```
+
+在 `settings_tabs.h` 的 `settings_field_t` 追加：
+
+```c
+    SETTINGS_FIELD_SHAKE_NAV,
+    SETTINGS_FIELD_SHAKE_SENS,
+```
+
+### 6.2 默认值
+
+```c
+static const settings_data_t SETTINGS_DEFAULTS = {
+    .notification_enabled = false,
+    .brightness_pct = 70,
+    .volume_pct = 50,
+    .mute = false,
+    .shake_nav_enabled = true,
+    .shake_sensitivity = SHAKE_SENS_MED,
+};
+```
+
+### 6.3 NVS Schema
+
+Namespace：`'settings'`（与现有字段共用）。
+
+| Key | 类型 | 字段 | 默认 |
+|-----|------|------|------|
+| `shake_en` | u8 | `shake_nav_enabled` | 1 |
+| `shake_sens` | u8 | `shake_sensitivity` | 1（Med） |
+
+`settings_store_load()` / `commit()` / `factory_reset()` 同步读写上述 key。
+
+### 6.4 settings_store_apply 扩展
+
+```c
+void settings_store_apply(void)
+{
+    /* 现有背光逻辑 */
+    uint16_t duty = (uint16_t)((s_data.brightness_pct * 1023U) / 100U);
+    display_backlight_set_brightness(duty);
+
+    /* 新增 */
+    motion_gesture_set_enabled(s_data.shake_nav_enabled);
+    motion_gesture_set_sensitivity(s_data.shake_sensitivity);
+}
+```
+
+**生效时机：**
+
+- 启动：`settings_store_load()` 后 `settings_store_apply()`
+- Save 按钮：`settings_store_commit()` 后 `settings_store_apply()`
+- Factory Reset：恢复默认后 `apply()`
+
+Switch / Roller 的 `VALUE_CHANGED` **仅更新内存**；与现有 notification / mute 行为一致，Save 后持久化。
+
+---
+
+## 7. Settings UI 变更
+
+### 7.1 System Tab 新增控件
+
+在 `load_system_settings()` 中，于 Factory Reset 按钮 **上方** 追加一行（y 续排，避免与 y=112 的 Reset 重叠）：
+
+| 控件 | x | y | 宽 | 高 | NVS 字段 | 行为 |
+|------|---|---|----|----|----------|------|
+| Label "Shake Navigation" | 4 | 40 | 120 | 28 | — | 静态文本 |
+| Switch | 180 | 40 | 40 | 28 | `shake_nav_enabled` | `SETTINGS_FIELD_SHAKE_NAV` |
+| Label "Shake Sensitivity" | 4 | 76 | 120 | 28 | — | 静态文本 |
+| Dropdown | 120 | 76 | 100 | 28 | `shake_sensitivity` | 选项 `"Low\nMed\nHigh"`，`SETTINGS_FIELD_SHAKE_SENS` |
+
+Factory Reset 按钮保持 **y=112** 不变（与 `settings-screen-landscape.md` §5.4 兼容，新增项插入中间行）。
+
+### 7.2 settings_tabs_collect 扩展
+
+`SETTINGS_TAB_SYSTEM` 分支增加：
+
+```c
+if (s_shake_nav_switch != NULL) {
+    out->shake_nav_enabled = lv_obj_has_state(s_shake_nav_switch, LV_STATE_CHECKED);
+}
+if (s_shake_sens_dropdown != NULL) {
+    out->shake_sensitivity = (shake_sensitivity_t)lv_dropdown_get_selected(s_shake_sens_dropdown);
+}
+```
+
+### 7.3 ui_handlers 扩展
+
+`settings_on_value_changed()` 增加 `SETTINGS_FIELD_SHAKE_NAV` / `SETTINGS_FIELD_SHAKE_SENS` case，更新 `settings_store` 内存 struct。
+
+**不在 VALUE_CHANGED 时调用 `motion_gesture_set_*`：** 与 brightness 类似，Save + `apply()` 后统一生效；若需即时预览开关，可在 Save 规范外额外 `apply()`（Phase 2 可选）。
+
+---
+
+## 8. 事件与集成
+
+### 8.1 初始化顺序
+
+扩展 `main/app/app_main.c`：
+
+```text
+1. nvs_flash_init()
+2. display_init()
+3. lvgl_port_init()
+4. touch_init()               [若 BOARD_TOUCH_ENABLED]
+5. lvgl_port_lock → ui_init() → ui_nav_init() → lvgl_port_unlock
+6. settings_store_load()
+7. settings_store_apply()     [背光 + motion 配置]
+8. ui_handlers_init()
+9. motion_gesture_init(on_motion_nav)  [注册 ui_nav_next 回调]
+10. imu_init()                 [启动 imu_task]
+11. ble_manager_init()
+```
+
+`ui_nav_init()` 须将 `s_nav_index` 与当前 loaded screen 同步（默认 Settings → index 0）。
+
+### 8.2 nav_handler_task
+
+```c
+static void nav_handler_task(void *arg)
+{
+    motion_nav_event_t ev;
+    while (xQueueReceive(s_nav_queue, &ev, portMAX_DELAY) == pdTRUE) {
+        if (ev == MOTION_NAV_NEXT) {
+            ui_nav_next();
+        }
+    }
+}
+```
+
+Queue 深度建议 **4**；`motion_gesture` 在 cooldown 内不应重复投递。
+
+### 8.3 CMakeLists.txt 变更
+
+在 `main/CMakeLists.txt` 的 `SRCS` 追加：
+
+```text
+"bsp/imu.c"
+"app/ui_nav.c"
+"app/motion_gesture.c"
+```
+
+`INCLUDE_DIRS` 已含 `app`、`bsp`，无需新增。
+
+### 8.4 任务优先级与栈
+
+| Task | 优先级 | 栈 | 说明 |
+|------|--------|-----|------|
+| `LVGL` | 2 | 8 KB | 已有 |
+| `imu_task` | 4 | 3 KB | I2C 读 + 回调 gesture |
+| `nav_handler` | 5 | 2 KB | Queue 消费，调用 ui_nav |
+| `boot_btn` | 5 | 2 KB | 已有，Phase 1 可复用测 nav |
+
+IMU 优先级低于 nav_handler，避免 I2C 阻塞切页响应。
+
+### 8.5 调试日志
+
+| Tag | 内容 |
+|-----|------|
+| `imu` | WHO_AM_I、init 失败 |
+| `motion` | shake 触发、mag 峰值（`CONFIG_LOG_DEFAULT_LEVEL` DEBUG 下） |
+| `ui_nav` | index 变化、screen 名称 |
+
+Phase 1 可启用 mag 峰值串口输出，便于真机调 threshold。
+
+---
+
+## 9. 实现步骤
+
+### 阶段 0：规格审核
+
+| 步骤 | 内容 | 状态 |
+|------|------|------|
+| 0.1 | 审核本文档 v1.0 | 待确认 |
+| 0.2 | 确认四屏轮播顺序与「任意摇→下一页」 | 已确认 |
+
+### 阶段 1：ui_nav + IMU 驱动基础
+
+| 步骤 | 内容 |
+|------|------|
+| 1.1 | `board_config.h` 增加 IMU 宏 |
+| 1.2 | 新建 `ui_nav.c`：注册表、init、next、lock 包装 |
+| 1.3 | BOOT 或 KEY 短按 → `ui_nav_next()`，真机验证四屏 fade 轮播 |
+| 1.4 | 新建 `imu.c`：I2C + WHO_AM_I + acc 读数 |
+| 1.5 | 串口打印 100 Hz acc；确认 WHO_AM_I 与 1g 静止读数 |
+
+**Phase 1 验收：** AC-2 用手动按键代替摇一摇通过；AC-1 通过。
+
+### 阶段 2：motion_gesture + Queue 切页
+
+| 步骤 | 内容 |
+|------|------|
+| 2.1 | 新建 `motion_gesture.c`：baseline、状态机、cooldown |
+| 2.2 | `nav_queue` + `nav_handler_task` → `ui_nav_next()` |
+| 2.3 | `imu_task` 调用 `motion_gesture_on_sample()` |
+| 2.4 | 真机调 threshold / cooldown，满足 AC-3 |
+
+**Phase 2 验收：** AC-2、AC-3、AC-7、AC-8。
+
+### 阶段 3：Settings + NVS
+
+| 步骤 | 内容 |
+|------|------|
+| 3.1 | 扩展 `settings_types.h`、`settings_store.c` |
+| 3.2 | System Tab UI + collect + ui_handlers |
+| 3.3 | `settings_store_apply()` 同步 motion 配置 |
+| 3.4 | Factory Reset 验证 motion 默认值 |
+
+**Phase 3 验收：** AC-4、AC-5、AC-6。
+
+### 阶段 4：增强（可选）
+
+| 步骤 | 内容 |
+|------|------|
+| 4.1 | INT1 Data Ready，降低轮询频率 |
+| 4.2 | `ui_nav_prev()` + 方向性摇一摇 |
+| 4.3 | 屏幕底部页码 dot（4 屏指示） |
+| 4.4 | 静止武装窗口，减少走路误触 |
+| 4.5 | VALUE_CHANGED 即时 apply shake 开关（免 Save 预览） |
+
+---
+
+## 10. 验收标准
+
+| 编号 | 验收项 | 标准 |
+|------|--------|------|
+| AC-1 | IMU 通信 | WHO_AM_I = `0x05`；静止时合成幅值 ≈ 0.05–0.15g（去 baseline 后） |
+| AC-2 | 轮播顺序 | 连续 4 次有效摇一摇：Settings → Screen1 → Screen2 → Screen3 → Settings |
+| AC-3 | Cooldown | 单次持续摇晃只触发 **1 次** 切页 |
+| AC-4 | 禁用开关 | Settings 中关闭 Shake Navigation 并 Save 后，摇一摇不切页 |
+| AC-5 | 灵敏度 | 相同力度下 High 比 Low 更易触发（至少能感知差异） |
+| AC-6 | NVS | 开关与灵敏度 Save 后重启仍保持 |
+| AC-7 | 线程安全 | 连续摇切 50 次无 crash、无 LVGL assert |
+| AC-8 | HID 无干扰 | 在 Screen2/3 摇切页时，不发送 BLE HID 报告 |
+
+---
+
+## 11. 风险与约束
+
+1. **I2C 冲突：** IMU 与触摸必须分 bus；禁止将 QMI8658 挂到 `I2C_NUM_0` 与 CST816 共用。
+2. **WHO_AM_I / 地址：** 硬件 SDO 接法可能导致 `0x6A`；init 失败时优先排查。
+3. **轴映射：** MVP 用合成幅值，方向错误仅影响 Phase 4 方向性手势，不影响 MVP。
+4. **Settings 未 Save 切屏：** 摇离 Settings 不 collect Tab；用户未 Save 的改动仍在内存，重启丢失——与现有 Settings 行为一致，需在 UI 文案或后续 Save 提示中考虑（非 MVP）。
+5. **CPU / 功耗：** 100 Hz 轮询 + I2C 读增加功耗；电池场景 Phase 4 改 INT 驱动。
+6. **Screen 布局：** Screen1/2/3 可能仍为 SquareLine 竖屏坐标，切页后布局可能错位；属 `settings-screen-landscape.md` Phase 3，不阻塞本 spec MVP。
+7. **误触：** 敲桌、走路仍可能触发；MVP 靠 threshold + cooldown，不做机器学习。
+8. **Factory Reset 范围：** 与 Settings spec 一致，Phase 1 仅擦除 `"settings"` namespace；BLE bonding 等保留。
+9. **陀螺仪：** MVP 不读 gyro；减少驱动复杂度。
+
+---
+
+## 12. 参考
+
+- 硬件引脚：`README.md` IMU 表
+- 板级配置：`main/bsp/board_config.h`
+- 触摸 I2C 范例：`main/bsp/touch.c`
+- LVGL 线程锁：`main/bsp/lvgl_port.c`（`lvgl_port_lock` / `unlock`）
+- 按键 Queue 范例：`main/bsp/boot_button.c`
+- UI 入口与默认屏：`main/ui/ui.c`
+- 切屏辅助： `main/ui/ui_helpers.c`（`_ui_screen_change`）
+- Settings 数据：`main/ui/settings/settings_store.c`
+- 姊妹规格：`docs/spec/settings-screen-landscape.md`（Phase 3 多屏导航由本 spec `ui_nav` 承接）
+- 姊妹规格：`docs/spec/ble-hid-keyboard.md`（HID 与切页独立）
+- LVGL 9.2：`lv_screen_load_anim()`、`LV_SCR_LOAD_ANIM_FADE_IN`
+- QMI8658A 数据手册（寄存器与 WHO_AM_I，实现 Phase 1 前必读）
+
+---
+
+## 修订记录
+
+| 版本 | 日期 | 说明 |
+|------|------|------|
+| 1.0 | 2026-07-05 | 初稿：四屏循环、任意摇→下一页、QMI8658 BSP、motion_gesture、ui_nav、Settings/NVS、分阶段实现与 AC-1～AC-8 |

main/CMakeLists.txt

@@ -1,10 +1,13 @@
 idf_component_register(SRCS
                         "app/app_main.c"
                         "app/ui_handlers.c"
+                        "app/ui_nav.c"
+                        "app/motion_gesture.c"
                         "bsp/display.c"
                         "bsp/touch.c"
                         "bsp/lvgl_port.c"
                         "bsp/boot_button.c"
+                        "bsp/imu.c"
                         "services/wifi_manager.c"
                         "services/ble_manager.c"
                         "services/ble_hid.c"
@@ -13,6 +16,10 @@ idf_component_register(SRCS
                         "ui/ui_helpers.c"
                         "ui/screens/ui_Screen1.c"
                         "ui/screens/ui_Screen2.c"
+                        "ui/screens/ui_Screen3.c"
+                        "ui/screens/ui_Settings.c"
+                        "ui/settings/settings_store.c"
+                        "ui/settings/settings_tabs.c"
                         "ui/widgets/ui_comp_hook.c"
                     PRIV_REQUIRES
                         bt
@@ -29,4 +36,6 @@ idf_component_register(SRCS
                         "app"
                         "bsp"
                         "services"
-                        "ui")
+                        "ui"
+                        "ui/settings"
+                        )

main/app/app_main.c

@@ -3,11 +3,15 @@
 
 #include "board_config.h"
 #include "display.h"
+#include "imu.h"
 #include "lvgl_port.h"
+#include "motion_gesture.h"
 #include "touch.h"
 #include "ui.h"
 #include "ui_handlers.h"
+#include "ui_nav.h"
 #include "ble_manager.h"
+#include "settings/settings_store.h"
 
 #if BOARD_WIFI_ENABLED
 #include "wifi_manager.h"
@@ -38,10 +42,25 @@ void app_main(void)
 
     lvgl_port_lock();
     ui_init();
+    ui_nav_init();
     lvgl_port_unlock();
 
+    settings_store_load();
+    settings_store_apply();
+
     ui_handlers_init();
 
+    motion_gesture_init(NULL);
+
+#if BOARD_IMU_ENABLED
+    ret = imu_init();
+    if (ret == ESP_OK) {
+        imu_start_task(motion_gesture_on_sample);
+    } else {
+        ESP_LOGW(TAG, "IMU init failed, shake navigation unavailable");
+    }
+#endif
+
 #if BOARD_WIFI_ENABLED
     ESP_LOGI(TAG, "Starting WiFi");
     wifi_manager_init();

main/app/motion_gesture.c

@@ -0,0 +1,295 @@
+#include "motion_gesture.h"
+
+#include "ui_nav.h"
+
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/queue.h"
+#include "freertos/task.h"
+
+#include <assert.h>
+#include <math.h>
+
+static const char *TAG = "motion";
+
+#define SAMPLE_PERIOD_MS         10
+#define SAMPLE_RATE_HZ           100
+
+/* Calibration: keep a sliding window of the last 500 ms and finish only when
+ * the window is stable (low variance). This avoids calibrating while the user
+ * is picking up or moving the device. */
+#define CALIBRATION_MS           500
+#define CALIBRATION_WINDOW_SAMPLES (CALIBRATION_MS / SAMPLE_PERIOD_MS)
+#define CALIBRATION_MAX_VAR_G2   0.010f
+
+/* Shake is detected on the horizontal plane (X/Y) so that picking the device
+ * up or putting it down (Z-axis jolt) does not trigger navigation. */
+#define THRESHOLD_LOW_G          0.6f
+#define THRESHOLD_MED_G          0.8f
+#define THRESHOLD_HIGH_G         1.0f
+
+/* A valid shake must produce enough strong samples within a short window. */
+#define WINDOW_MS                300
+#define MIN_SAMPLES              5
+
+/* A real shake oscillates; require at least two zero-crossings on the
+ * dominant horizontal axis to distinguish it from a single jolt. */
+#define MIN_ZERO_CROSSINGS       2
+
+/* Cooldown prevents one physical shake from generating multiple events. */
+#define COOLDOWN_MS              350
+
+typedef enum {
+    GESTURE_IDLE = 0,
+    GESTURE_COOLDOWN,
+} gesture_state_t;
+
+static QueueHandle_t s_nav_queue;
+static bool s_enabled = true;
+static float s_threshold = THRESHOLD_MED_G;
+static gesture_state_t s_state = GESTURE_IDLE;
+
+/* Baseline calibration */
+static float s_ref_x;
+static float s_ref_y;
+static float s_ref_z;
+static bool s_calibrated;
+
+static float s_cal_buf_x[CALIBRATION_WINDOW_SAMPLES];
+static float s_cal_buf_y[CALIBRATION_WINDOW_SAMPLES];
+static float s_cal_buf_z[CALIBRATION_WINDOW_SAMPLES];
+static int s_cal_head;
+static int s_cal_count;
+
+/* Detection window state */
+static int s_over_count;
+static int64_t s_window_start_us;
+static int s_zero_crossings;
+static int s_last_x_sign;
+static int s_last_y_sign;
+static int64_t s_cooldown_until_us;
+
+/* Last horizontal magnitude, exposed for UI/debug. */
+static float s_last_horizontal_mag;
+
+static void nav_handler_task(void *arg)
+{
+    (void)arg;
+    motion_nav_event_t ev;
+
+    while (xQueueReceive(s_nav_queue, &ev, portMAX_DELAY) == pdTRUE) {
+        if (ev == MOTION_NAV_NEXT) {
+            ui_nav_next();
+        }
+    }
+}
+
+static void post_nav_next(void)
+{
+    motion_nav_event_t ev = MOTION_NAV_NEXT;
+    if (xQueueSend(s_nav_queue, &ev, 0) != pdTRUE) {
+        ESP_LOGW(TAG, "nav queue full");
+    } else {
+        ESP_LOGI(TAG, "Shake detected -> next screen");
+    }
+}
+
+static void reset_window(void)
+{
+    s_over_count = 0;
+    s_window_start_us = 0;
+    s_zero_crossings = 0;
+    s_last_x_sign = 0;
+    s_last_y_sign = 0;
+}
+
+static void run_calibration(float ax, float ay, float az)
+{
+    s_cal_buf_x[s_cal_head] = ax;
+    s_cal_buf_y[s_cal_head] = ay;
+    s_cal_buf_z[s_cal_head] = az;
+    s_cal_head = (s_cal_head + 1) % CALIBRATION_WINDOW_SAMPLES;
+    if (s_cal_count < CALIBRATION_WINDOW_SAMPLES) {
+        s_cal_count++;
+    }
+
+    if (s_cal_count < CALIBRATION_WINDOW_SAMPLES) {
+        return;
+    }
+
+    float sum_x = 0.0f;
+    float sum_y = 0.0f;
+    float sum_z = 0.0f;
+    float sum_sq_x = 0.0f;
+    float sum_sq_y = 0.0f;
+    float sum_sq_z = 0.0f;
+
+    for (int i = 0; i < CALIBRATION_WINDOW_SAMPLES; i++) {
+        sum_x += s_cal_buf_x[i];
+        sum_y += s_cal_buf_y[i];
+        sum_z += s_cal_buf_z[i];
+        sum_sq_x += s_cal_buf_x[i] * s_cal_buf_x[i];
+        sum_sq_y += s_cal_buf_y[i] * s_cal_buf_y[i];
+        sum_sq_z += s_cal_buf_z[i] * s_cal_buf_z[i];
+    }
+
+    const int n = CALIBRATION_WINDOW_SAMPLES;
+    float var_x = (sum_sq_x / n) - (sum_x / n) * (sum_x / n);
+    float var_y = (sum_sq_y / n) - (sum_y / n) * (sum_y / n);
+    float var_z = (sum_sq_z / n) - (sum_z / n) * (sum_z / n);
+    float max_var = fmaxf(var_x, fmaxf(var_y, var_z));
+
+    if (max_var > CALIBRATION_MAX_VAR_G2) {
+        static int64_t s_last_cal_warn_us;
+        int64_t now_us = esp_timer_get_time();
+        if ((now_us - s_last_cal_warn_us) >= 1000 * 1000) {
+            s_last_cal_warn_us = now_us;
+            ESP_LOGW(TAG, "Calibration: motion detected (var=%.3f), waiting", max_var);
+        }
+        return;
+    }
+
+    s_ref_x = sum_x / n;
+    s_ref_y = sum_y / n;
+    s_ref_z = sum_z / n;
+    s_calibrated = true;
+
+    ESP_LOGI(TAG, "Baseline calibrated (ref=%.3f,%.3f,%.3f g)", s_ref_x, s_ref_y, s_ref_z);
+}
+
+static int axis_sign(float value)
+{
+    if (value > 0.0f) {
+        return 1;
+    }
+    if (value < 0.0f) {
+        return -1;
+    }
+    return 0;
+}
+
+static void process_sample(float ax, float ay, float az)
+{
+    int64_t now_us = esp_timer_get_time();
+
+    if (!s_calibrated) {
+        run_calibration(ax, ay, az);
+        return;
+    }
+
+    float dx = ax - s_ref_x;
+    float dy = ay - s_ref_y;
+    float dz = az - s_ref_z;
+
+    /* Use only horizontal magnitude for shake detection. Z-axis is dominated by
+     * gravity and is the main axis for pick-up/put-down false triggers. */
+    float horizontal_mag = sqrtf(dx * dx + dy * dy);
+    s_last_horizontal_mag = horizontal_mag;
+
+    if (s_state == GESTURE_COOLDOWN) {
+        if (now_us >= s_cooldown_until_us) {
+            s_state = GESTURE_IDLE;
+            reset_window();
+        }
+        return;
+    }
+
+    if (horizontal_mag > s_threshold) {
+        if (s_over_count == 0) {
+            s_window_start_us = now_us;
+        }
+        s_over_count++;
+
+        int x_sign = axis_sign(dx);
+        int y_sign = axis_sign(dy);
+        if (s_last_x_sign != 0 && x_sign != s_last_x_sign) {
+            s_zero_crossings++;
+        }
+        if (s_last_y_sign != 0 && y_sign != s_last_y_sign) {
+            s_zero_crossings++;
+        }
+        s_last_x_sign = x_sign;
+        s_last_y_sign = y_sign;
+
+        int64_t window_us = (int64_t)WINDOW_MS * 1000;
+        if ((now_us - s_window_start_us) > window_us) {
+            /* Window expired: start fresh with the current sample. */
+            reset_window();
+            s_window_start_us = now_us;
+            s_over_count = 1;
+            s_last_x_sign = axis_sign(dx);
+            s_last_y_sign = axis_sign(dy);
+        }
+
+        if (s_over_count >= MIN_SAMPLES && s_zero_crossings >= MIN_ZERO_CROSSINGS) {
+            if (s_enabled) {
+                post_nav_next();
+            }
+            s_state = GESTURE_COOLDOWN;
+            s_cooldown_until_us = now_us + (int64_t)COOLDOWN_MS * 1000;
+            reset_window();
+        }
+    } else if (s_over_count > 0) {
+        int64_t window_us = (int64_t)WINDOW_MS * 1000;
+        if ((now_us - s_window_start_us) > window_us) {
+            reset_window();
+        }
+    }
+
+    (void)dz;
+}
+
+void motion_gesture_init(motion_nav_cb_t cb)
+{
+    (void)cb;
+
+    s_nav_queue = xQueueCreate(4, sizeof(motion_nav_event_t));
+    xTaskCreate(nav_handler_task, "nav_handler", 2048, NULL, 5, NULL);
+
+    s_calibrated = false;
+    s_cal_head = 0;
+    s_cal_count = 0;
+
+    ESP_LOGI(TAG, "Motion gesture ready (calibrating %d ms)", CALIBRATION_MS);
+}
+
+void motion_gesture_set_enabled(bool enabled)
+{
+    s_enabled = enabled;
+    ESP_LOGI(TAG, "Shake navigation %s", enabled ? "enabled" : "disabled");
+}
+
+void motion_gesture_set_sensitivity(shake_sensitivity_t sens)
+{
+    switch (sens) {
+    case SHAKE_SENS_LOW:
+        s_threshold = THRESHOLD_LOW_G;
+        break;
+    case SHAKE_SENS_MED:
+        s_threshold = THRESHOLD_MED_G;
+        break;
+    case SHAKE_SENS_HIGH:
+        s_threshold = THRESHOLD_HIGH_G;
+        break;
+    default:
+        assert(false && "unexpected shake_sensitivity_t");
+        break;
+    }
+    ESP_LOGI(TAG, "Sensitivity set (threshold=%.2f g)", s_threshold);
+}
+
+void motion_gesture_on_sample(float ax_g, float ay_g, float az_g)
+{
+    process_sample(ax_g, ay_g, az_g);
+}
+
+float motion_gesture_get_last_magnitude(void)
+{
+    return s_last_horizontal_mag;
+}
+
+bool motion_gesture_is_calibrated(void)
+{
+    return s_calibrated;
+}

main/app/motion_gesture.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include <stdbool.h>
+
+#include "settings_types.h"
+
+typedef enum {
+    MOTION_NAV_NEXT = 0,
+} motion_nav_event_t;
+
+typedef void (*motion_nav_cb_t)(motion_nav_event_t event);
+
+void motion_gesture_init(motion_nav_cb_t cb);
+void motion_gesture_set_enabled(bool enabled);
+void motion_gesture_set_sensitivity(shake_sensitivity_t sens);
+void motion_gesture_on_sample(float ax_g, float ay_g, float az_g);
+
+float motion_gesture_get_last_magnitude(void);
+bool motion_gesture_is_calibrated(void);

main/app/ui_handlers.c

@@ -1,28 +1,130 @@
 #include "ui_handlers.h"
 
 #include <stdbool.h>
+#include <stdint.h>
 
 #include "ble_hid.h"
 #include "boot_button.h"
 #include "esp_log.h"
+#include "esp_system.h"
+#include "screens/ui_Settings.h"
+#include "settings/settings_store.h"
+#include "settings/settings_tabs.h"
 #include "ui_events.h"
 
 static const char *TAG = "ui_handlers";
 
-static void on_boot_press(void)
+static void send_hid_combo_or_warn(uint8_t modifier, uint8_t keycode)
 {
     if (ble_hid_ready()) {
-        ble_hid_send_combo(0, HID_KEY_C);
+        ble_hid_send_combo(modifier, keycode);
     } else {
         ESP_LOGW(TAG, "HID not ready");
     }
 }
 
+static void send_consumer_or_warn(uint16_t usage)
+{
+    if (ble_hid_ready()) {
+        ble_hid_send_consumer(usage);
+    } else {
+        ESP_LOGW(TAG, "HID not ready");
+    }
+}
+
+static void on_boot_press(void)
+{
+    send_hid_combo_or_warn(0, HID_KEY_C);
+}
+
 void ui_handlers_init(void)
 {
     boot_button_init(on_boot_press);
 }
 
+void settings_on_tab_clicked(lv_event_t *e)
+{
+    settings_tab_t tab = (settings_tab_t)(intptr_t)lv_event_get_user_data(e);
+    ui_Settings_switch_tab(tab);
+}
+
+void settings_on_save_clicked(lv_event_t *e)
+{
+    (void)e;
+    settings_data_t buf = *settings_store_get();
+    settings_tabs_collect(ui_Settings_get_active_tab(), &buf);
+    settings_store_update(&buf);
+    esp_err_t err = settings_store_commit();
+    if (err == ESP_OK) {
+        settings_store_apply();
+        ESP_LOGI(TAG, "Settings saved");
+    } else {
+        ESP_LOGW(TAG, "Settings save failed");
+    }
+}
+
+void settings_on_factory_reset(lv_event_t *e)
+{
+    (void)e;
+    ESP_LOGW(TAG, "Factory reset");
+    settings_store_factory_reset();
+    settings_store_apply();
+    esp_restart();
+}
+
+void settings_on_brightness_changed(lv_event_t *e)
+{
+    lv_obj_t *slider = lv_event_get_target(e);
+    uint8_t pct = (uint8_t)lv_slider_get_value(slider);
+
+    settings_data_t buf = *settings_store_get();
+    buf.brightness_pct = pct;
+    settings_store_update(&buf);
+    settings_store_apply();
+
+    lv_obj_t *pct_label = lv_obj_get_user_data(slider);
+    if (pct_label != NULL) {
+        lv_label_set_text_fmt(pct_label, "%u%%", pct);
+    }
+}
+
+void settings_on_value_changed(lv_event_t *e)
+{
+    settings_field_t field =
+        (settings_field_t)(intptr_t)lv_event_get_user_data(e);
+    lv_obj_t *target = lv_event_get_target(e);
+    settings_data_t buf = *settings_store_get();
+
+    switch (field) {
+    case SETTINGS_FIELD_NOTIFICATION:
+        buf.notification_enabled = lv_obj_has_state(target, LV_STATE_CHECKED);
+        break;
+    case SETTINGS_FIELD_VOLUME:
+        buf.volume_pct = (uint8_t)lv_slider_get_value(target);
+        break;
+    case SETTINGS_FIELD_MUTE:
+        buf.mute = lv_obj_has_state(target, LV_STATE_CHECKED);
+        break;
+    case SETTINGS_FIELD_SHAKE_NAV:
+        buf.shake_nav_enabled = lv_obj_has_state(target, LV_STATE_CHECKED);
+        break;
+    case SETTINGS_FIELD_SHAKE_SENS:
+        buf.shake_sensitivity = (shake_sensitivity_t)lv_dropdown_get_selected(target);
+        break;
+    default:
+        LV_ASSERT_MSG(false, "unexpected settings_field_t");
+        break;
+    }
+
+    settings_store_update(&buf);
+}
+
+void settings_on_network_scan_clicked(lv_event_t *e)
+{
+    (void)e;
+    ESP_LOGI(TAG, "Not available");
+}
+
 void update_year_action(lv_event_t * e)
 {
     (void)e;
@@ -31,14 +133,53 @@ void update_year_action(lv_event_t * e)
 void click_button_two(lv_event_t * e)
 {
     (void)e;
+    send_hid_combo_or_warn(HID_MOD_LCTRL, HID_KEY_C);
 }
 
 void click_button_three(lv_event_t * e)
 {
     (void)e;
+    send_hid_combo_or_warn(HID_MOD_LCTRL, HID_KEY_V);
 }
 
 void click_button_one(lv_event_t * e)
 {
     (void)e;
+    send_hid_combo_or_warn(HID_MOD_LCTRL, HID_KEY_X);
+}
+
+void click_consumer_vol_up(lv_event_t * e)
+{
+    (void)e;
+    send_consumer_or_warn(HID_CONSUMER_VOLUME_UP);
+}
+
+void click_consumer_vol_down(lv_event_t * e)
+{
+    (void)e;
+    send_consumer_or_warn(HID_CONSUMER_VOLUME_DOWN);
+}
+
+void click_consumer_mute(lv_event_t * e)
+{
+    (void)e;
+    send_consumer_or_warn(HID_CONSUMER_MUTE);
+}
+
+void click_consumer_play_pause(lv_event_t * e)
+{
+    (void)e;
+    send_consumer_or_warn(HID_CONSUMER_PLAY_PAUSE);
+}
+
+void click_consumer_prev(lv_event_t * e)
+{
+    (void)e;
+    send_consumer_or_warn(HID_CONSUMER_SCAN_PREVIOUS);
+}
+
+void click_consumer_next(lv_event_t * e)
+{
+    (void)e;
+    send_consumer_or_warn(HID_CONSUMER_SCAN_NEXT);
 }

main/app/ui_handlers.h

@@ -1,4 +1,13 @@
 #pragma once
 
+#include "lvgl.h"
+
 /* UI event callbacks declared in ui_events.h are implemented in ui_handlers.c */
 void ui_handlers_init(void);
+
+void settings_on_tab_clicked(lv_event_t *e);
+void settings_on_save_clicked(lv_event_t *e);
+void settings_on_factory_reset(lv_event_t *e);
+void settings_on_brightness_changed(lv_event_t *e);
+void settings_on_value_changed(lv_event_t *e);
+void settings_on_network_scan_clicked(lv_event_t *e);

main/app/ui_nav.c

@@ -0,0 +1,76 @@
+#include "ui_nav.h"
+
+#include "lvgl_port.h"
+#include "screens/ui_Screen1.h"
+#include "screens/ui_Screen2.h"
+#include "screens/ui_Screen3.h"
+#include "screens/ui_Settings.h"
+#include "ui_helpers.h"
+
+#include "esp_log.h"
+
+static const char *TAG = "ui_nav";
+
+static lv_obj_t *s_nav_screens[4];
+static const char *const s_nav_names[] = {
+    "Settings",
+    "Screen1",
+    "Screen2",
+    "Screen3",
+};
+
+#define NAV_SCREEN_COUNT (sizeof(s_nav_screens) / sizeof(s_nav_screens[0]))
+
+static uint8_t s_nav_index;
+
+void ui_nav_init(void)
+{
+    s_nav_screens[0] = ui_Settings;
+    s_nav_screens[1] = ui_Screen1;
+    s_nav_screens[2] = ui_Screen2;
+    s_nav_screens[3] = ui_Screen3;
+    s_nav_index = 0;
+    ESP_LOGI(TAG, "Navigation ready (%u screens, start=%s)", (unsigned)NAV_SCREEN_COUNT,
+             s_nav_names[s_nav_index]);
+}
+
+void ui_nav_goto(uint8_t index)
+{
+    if (index >= NAV_SCREEN_COUNT) {
+        return;
+    }
+
+    lvgl_port_lock();
+    s_nav_index = index;
+    lv_obj_t **target = &s_nav_screens[s_nav_index];
+    _ui_screen_change(target, LV_SCR_LOAD_ANIM_FADE_IN, 300, 0, NULL);
+    lvgl_port_unlock();
+
+    ESP_LOGI(TAG, "Goto %s (index %u)", s_nav_names[s_nav_index], s_nav_index);
+}
+
+void ui_nav_next(void)
+{
+    lvgl_port_lock();
+    s_nav_index = (s_nav_index + 1) % NAV_SCREEN_COUNT;
+    lv_obj_t **target = &s_nav_screens[s_nav_index];
+    _ui_screen_change(target, LV_SCR_LOAD_ANIM_FADE_IN, 300, 0, NULL);
+    lvgl_port_unlock();
+
+    ESP_LOGI(TAG, "Next -> %s (index %u)", s_nav_names[s_nav_index], s_nav_index);
+}
+
+lv_obj_t *ui_nav_current(void)
+{
+    return s_nav_screens[s_nav_index];
+}
+
+uint8_t ui_nav_current_index(void)
+{
+    return s_nav_index;
+}
+
+const char *ui_nav_current_name(void)
+{
+    return s_nav_names[s_nav_index];
+}

main/app/ui_nav.h

@@ -0,0 +1,11 @@
+#pragma once
+
+#include "lvgl.h"
+
+void ui_nav_init(void);
+void ui_nav_next(void);
+void ui_nav_goto(uint8_t index);
+
+lv_obj_t *ui_nav_current(void);
+uint8_t ui_nav_current_index(void);
+const char *ui_nav_current_name(void);

main/bsp/board_config.h

@@ -9,6 +9,15 @@
 #define BOARD_LCD_PIXEL_CLOCK_HZ (20 * 1000 * 1000)
 #define BOARD_LCD_H_RES          170
 #define BOARD_LCD_V_RES          320
+
+/* LVGL logical resolution after 90° rotation (landscape) */
+#define BOARD_LCD_LOGIC_H_RES    320
+#define BOARD_LCD_LOGIC_V_RES    170
+
+/* Touch IC → physical panel alignment (not LVGL logical rotation) */
+#define BOARD_TOUCH_SWAP_XY      0
+#define BOARD_TOUCH_MIRROR_X     0
+#define BOARD_TOUCH_MIRROR_Y     0
 #define BOARD_LCD_PANEL_H_RES    240
 #define BOARD_LCD_GAP_X          ((BOARD_LCD_PANEL_H_RES - BOARD_LCD_H_RES) / 2)
 #define BOARD_LCD_GAP_Y          0
@@ -40,6 +49,15 @@
 #define BOARD_TOUCH_I2C_FREQ_HZ  400000
 #define BOARD_TOUCH_ENABLED      1
 
+/* IMU (QMI8658) — shares I2C bus with touch on IO47/IO48 */
+#define BOARD_IMU_I2C_NUM        I2C_NUM_0
+#define BOARD_PIN_IMU_SDA        47
+#define BOARD_PIN_IMU_SCL        48
+#define BOARD_PIN_IMU_INT1       8
+#define BOARD_PIN_IMU_INT2       7
+#define BOARD_IMU_I2C_FREQ_HZ    400000
+#define BOARD_IMU_ENABLED        1
+
 /* User IO */
 #define BOARD_PIN_BOOT           0
 #define BOARD_PIN_KEY            4

main/bsp/display.c

@@ -2,7 +2,6 @@
 
 #include "board_config.h"
 
-#include "driver/gpio.h"
 #include "driver/ledc.h"
 #include "driver/spi_master.h"
 #include "esp_lcd_panel_ops.h"
@@ -49,6 +48,7 @@ esp_err_t display_init(esp_lcd_panel_io_handle_t *io_handle_out,
         .gpio_num = BOARD_PIN_BK_LIGHT,
         .duty = 0,
         .hpoint = 0,
+        .flags.output_invert = 1,
     };
     ESP_ERROR_CHECK(ledc_channel_config(&ledc_channel));
 
@@ -90,9 +90,6 @@ esp_err_t display_init(esp_lcd_panel_io_handle_t *io_handle_out,
     ESP_ERROR_CHECK(esp_lcd_panel_set_gap(panel_handle, BOARD_LCD_GAP_X, BOARD_LCD_GAP_Y));
     ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(panel_handle, true));
 
-    ESP_LOGI(TAG, "Turn on LCD backlight");
-    gpio_set_level(BOARD_PIN_BK_LIGHT, BOARD_LCD_BK_LIGHT_ON_LEVEL);
-
     *io_handle_out = io_handle;
     *panel_handle_out = panel_handle;
     return ESP_OK;

main/bsp/imu.c

@@ -0,0 +1,308 @@
+#include "imu.h"
+
+#include "board_config.h"
+#include "touch.h"
+
+#include "driver/i2c_master.h"
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+#include <math.h>
+
+static const char *TAG = "imu";
+
+#if BOARD_IMU_ENABLED
+
+#define QMI8658_ADDR_SDO_LOW     0x6A
+#define QMI8658_ADDR_SDO_HIGH    0x6B
+#define QMI8658_WHO_AM_I         0x00
+#define QMI8658_WHO_AM_I_ID      0x05
+#define QMI8658_CTRL1            0x02
+#define QMI8658_CTRL2            0x03
+#define QMI8658_CTRL3            0x04
+#define QMI8658_CTRL5            0x06
+#define QMI8658_CTRL6            0x07
+#define QMI8658_CTRL7            0x08
+#define QMI8658_RESET            0x60
+#define QMI8658_ACC_X_L          0x35
+
+#define QMI8658_RESET_VALUE      0xB0
+/* Little-endian + address auto-increment (matches int16 parse below) */
+#define QMI8658_CTRL1_VALUE      0x40
+/* ±8g, 1000 Hz ODR */
+#define QMI8658_CTRL2_VALUE      0x23
+/* Gyro ±512 dps, 1000 Hz — required even when only reading accel */
+#define QMI8658_CTRL3_VALUE      0x53
+#define QMI8658_CTRL5_VALUE      0x11
+#define QMI8658_CTRL6_VALUE      0x00
+#define QMI8658_CTRL7_VALUE      0x03
+
+#define QMI8658_ACCEL_SENS_8G    4096.0f
+
+#define IMU_SAMPLE_PERIOD_MS     10
+#define IMU_DEBUG_LOG_INTERVAL_MS 1000
+
+static i2c_master_bus_handle_t s_imu_bus;
+static i2c_master_dev_handle_t s_imu_dev;
+static imu_sample_cb_t s_sample_cb;
+
+static esp_err_t imu_read_raw(int16_t *rx, int16_t *ry, int16_t *rz);
+
+static int16_t imu_raw16_le(const uint8_t *lo, const uint8_t *hi)
+{
+    return (int16_t)((*hi << 8) | *lo);
+}
+
+static esp_err_t imu_write_u8(uint8_t reg, uint8_t val)
+{
+    uint8_t buf[2] = {reg, val};
+    return i2c_master_transmit(s_imu_dev, buf, sizeof(buf), 100);
+}
+
+static esp_err_t imu_read_u8(uint8_t reg, uint8_t *val)
+{
+    return i2c_master_transmit_receive(s_imu_dev, &reg, 1, val, 1, 100);
+}
+
+static esp_err_t imu_read_bytes(uint8_t reg, uint8_t *data, size_t len)
+{
+    return i2c_master_transmit_receive(s_imu_dev, &reg, 1, data, len, 100);
+}
+
+static esp_err_t imu_probe_device(uint8_t addr)
+{
+    i2c_device_config_t dev_cfg = {
+        .dev_addr_length = I2C_ADDR_BIT_LEN_7,
+        .device_address = addr,
+        .scl_speed_hz = BOARD_IMU_I2C_FREQ_HZ,
+    };
+
+    esp_err_t err = i2c_master_bus_add_device(s_imu_bus, &dev_cfg, &s_imu_dev);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    uint8_t who_am_i = 0;
+    err = imu_read_u8(QMI8658_WHO_AM_I, &who_am_i);
+    if (err != ESP_OK || who_am_i != QMI8658_WHO_AM_I_ID) {
+        i2c_master_bus_rm_device(s_imu_dev);
+        s_imu_dev = NULL;
+        if (err == ESP_OK) {
+            ESP_LOGW(TAG, "WHO_AM_I mismatch at 0x%02X: 0x%02X", addr, who_am_i);
+            return ESP_ERR_NOT_FOUND;
+        }
+        return err;
+    }
+
+    ESP_LOGI(TAG, "QMI8658 found at 0x%02X (WHO_AM_I=0x%02X)", addr, who_am_i);
+    return ESP_OK;
+}
+
+static esp_err_t imu_configure(void)
+{
+    esp_err_t err = imu_write_u8(QMI8658_RESET, QMI8658_RESET_VALUE);
+    if (err != ESP_OK) {
+        return err;
+    }
+    vTaskDelay(pdMS_TO_TICKS(50));
+
+    err = imu_write_u8(QMI8658_CTRL1, QMI8658_CTRL1_VALUE);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    err = imu_write_u8(QMI8658_CTRL2, QMI8658_CTRL2_VALUE);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    err = imu_write_u8(QMI8658_CTRL3, QMI8658_CTRL3_VALUE);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    err = imu_write_u8(QMI8658_CTRL5, QMI8658_CTRL5_VALUE);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    err = imu_write_u8(QMI8658_CTRL6, QMI8658_CTRL6_VALUE);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    err = imu_write_u8(QMI8658_CTRL7, QMI8658_CTRL7_VALUE);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    vTaskDelay(pdMS_TO_TICKS(50));
+    return ESP_OK;
+}
+
+static void imu_log_sample(const char *label, float ax, float ay, float az,
+                           int16_t rx, int16_t ry, int16_t rz)
+{
+    float mag = sqrtf(ax * ax + ay * ay + az * az);
+    ESP_LOGI(TAG, "%s raw=(%d,%d,%d) g=(%.3f,%.3f,%.3f) |mag|=%.3f",
+             label, rx, ry, rz, ax, ay, az, mag);
+}
+
+static void imu_task(void *arg)
+{
+    (void)arg;
+
+    int64_t last_log_us = esp_timer_get_time();
+
+    while (1) {
+        float ax = 0.0f;
+        float ay = 0.0f;
+        float az = 0.0f;
+        int16_t rx = 0;
+        int16_t ry = 0;
+        int16_t rz = 0;
+
+        esp_err_t err = imu_read_raw(&rx, &ry, &rz);
+        if (err == ESP_OK) {
+            ax = (float)rx / QMI8658_ACCEL_SENS_8G;
+            ay = (float)ry / QMI8658_ACCEL_SENS_8G;
+            az = (float)rz / QMI8658_ACCEL_SENS_8G;
+
+            int64_t now_us = esp_timer_get_time();
+            if ((now_us - last_log_us) >= (int64_t)IMU_DEBUG_LOG_INTERVAL_MS * 1000) {
+                imu_log_sample("sample", ax, ay, az, rx, ry, rz);
+                last_log_us = now_us;
+            }
+
+            if (s_sample_cb != NULL) {
+                s_sample_cb(ax, ay, az);
+            }
+        }
+
+        vTaskDelay(pdMS_TO_TICKS(IMU_SAMPLE_PERIOD_MS));
+    }
+}
+
+esp_err_t imu_init(void)
+{
+#if BOARD_TOUCH_ENABLED
+    s_imu_bus = touch_get_i2c_bus();
+    if (s_imu_bus == NULL) {
+        ESP_LOGE(TAG, "Shared I2C bus not ready (touch not initialized?)");
+        return ESP_ERR_INVALID_STATE;
+    }
+    ESP_LOGI(TAG, "Using shared I2C bus (SDA=%d SCL=%d)", BOARD_PIN_IMU_SDA,
+             BOARD_PIN_IMU_SCL);
+#else
+    ESP_LOGI(TAG, "Initialize dedicated I2C for IMU");
+    i2c_master_bus_config_t bus_config = {
+        .clk_source = I2C_CLK_SRC_DEFAULT,
+        .i2c_port = BOARD_IMU_I2C_NUM,
+        .sda_io_num = BOARD_PIN_IMU_SDA,
+        .scl_io_num = BOARD_PIN_IMU_SCL,
+        .glitch_ignore_cnt = 7,
+        .flags.enable_internal_pullup = true,
+    };
+    esp_err_t bus_err = i2c_new_master_bus(&bus_config, &s_imu_bus);
+    if (bus_err != ESP_OK) {
+        return bus_err;
+    }
+#endif
+
+    esp_err_t err = imu_probe_device(QMI8658_ADDR_SDO_LOW);
+    if (err != ESP_OK) {
+        err = imu_probe_device(QMI8658_ADDR_SDO_HIGH);
+    }
+    if (err != ESP_OK) {
+        ESP_LOGE(TAG, "QMI8658 not found");
+        return err;
+    }
+
+    err = imu_configure();
+    if (err != ESP_OK) {
+        ESP_LOGE(TAG, "IMU configure failed: %s", esp_err_to_name(err));
+        return err;
+    }
+
+    float ax = 0.0f;
+    float ay = 0.0f;
+    float az = 0.0f;
+    int16_t rx = 0;
+    int16_t ry = 0;
+    int16_t rz = 0;
+    if (imu_read_accel(&ax, &ay, &az) == ESP_OK) {
+        imu_read_raw(&rx, &ry, &rz);
+        imu_log_sample("init check", ax, ay, az, rx, ry, rz);
+    } else {
+        ESP_LOGW(TAG, "Init check read failed");
+    }
+
+    ESP_LOGI(TAG, "IMU initialized (±8g, 1000 Hz ODR)");
+    return ESP_OK;
+}
+
+static esp_err_t imu_read_raw(int16_t *rx, int16_t *ry, int16_t *rz)
+{
+    if (s_imu_dev == NULL || rx == NULL || ry == NULL || rz == NULL) {
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    uint8_t raw[6];
+    esp_err_t err = imu_read_bytes(QMI8658_ACC_X_L, raw, sizeof(raw));
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    *rx = imu_raw16_le(&raw[0], &raw[1]);
+    *ry = imu_raw16_le(&raw[2], &raw[3]);
+    *rz = imu_raw16_le(&raw[4], &raw[5]);
+    return ESP_OK;
+}
+
+esp_err_t imu_read_accel(float *ax, float *ay, float *az)
+{
+    int16_t rx = 0;
+    int16_t ry = 0;
+    int16_t rz = 0;
+
+    esp_err_t err = imu_read_raw(&rx, &ry, &rz);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    *ax = (float)rx / QMI8658_ACCEL_SENS_8G;
+    *ay = (float)ry / QMI8658_ACCEL_SENS_8G;
+    *az = (float)rz / QMI8658_ACCEL_SENS_8G;
+    return ESP_OK;
+}
+
+void imu_start_task(imu_sample_cb_t cb)
+{
+    s_sample_cb = cb;
+    xTaskCreate(imu_task, "imu_task", 3072, NULL, 4, NULL);
+    ESP_LOGI(TAG, "IMU sample task started");
+}
+
+#else
+
+esp_err_t imu_init(void)
+{
+    return ESP_OK;
+}
+
+esp_err_t imu_read_accel(float *ax, float *ay, float *az)
+{
+    (void)ax;
+    (void)ay;
+    (void)az;
+    return ESP_ERR_NOT_SUPPORTED;
+}
+
+void imu_start_task(imu_sample_cb_t cb)
+{
+    (void)cb;
+}
+
+#endif

main/bsp/imu.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include "esp_err.h"
+
+typedef void (*imu_sample_cb_t)(float ax_g, float ay_g, float az_g);
+
+esp_err_t imu_init(void);
+esp_err_t imu_read_accel(float *ax, float *ay, float *az);
+void imu_start_task(imu_sample_cb_t cb);

main/bsp/lvgl_port.c

@@ -2,6 +2,7 @@
 
 #include "board_config.h"
 
+#include "draw/sw/lv_draw_sw.h"
 #include "driver/spi_master.h"
 #include "esp_lcd_panel_ops.h"
 #include "esp_log.h"
@@ -31,14 +32,40 @@ static bool notify_flush_ready(esp_lcd_panel_io_handle_t panel_io,
 static void flush_cb(lv_display_t *disp, const lv_area_t *area, uint8_t *px_map)
 {
     esp_lcd_panel_handle_t panel_handle = lv_display_get_user_data(disp);
-    int offsetx1 = area->x1;
+    const lv_area_t *draw_area = area;
-    int offsetx2 = area->x2;
+    uint8_t *draw_buf = px_map;
-    int offsety1 = area->y1;
+
-    int offsety2 = area->y2;
+    static uint8_t rotated_buf[BOARD_LCD_H_RES * BOARD_LVGL_DRAW_BUF_LINES *
-    lv_draw_sw_rgb565_swap(px_map,
+                                sizeof(lv_color16_t)];
+
+    lv_display_rotation_t rotation = lv_display_get_rotation(disp);
+    lv_area_t rotated_area;
+    if (rotation != LV_DISPLAY_ROTATION_0) {
+        lv_color_format_t cf = lv_display_get_color_format(disp);
+        rotated_area = *area;
+        lv_display_rotate_area(disp, &rotated_area);
+
+        int32_t src_w = lv_area_get_width(area);
+        int32_t src_h = lv_area_get_height(area);
+        uint32_t src_stride = lv_draw_buf_width_to_stride(src_w, cf);
+        uint32_t dest_stride =
+            lv_draw_buf_width_to_stride(lv_area_get_width(&rotated_area), cf);
+
+        lv_draw_sw_rotate(px_map, rotated_buf, src_w, src_h, src_stride,
+                          dest_stride, rotation, cf);
+
+        draw_area = &rotated_area;
+        draw_buf = rotated_buf;
+    }
+
+    int offsetx1 = draw_area->x1;
+    int offsetx2 = draw_area->x2;
+    int offsety1 = draw_area->y1;
+    int offsety2 = draw_area->y2;
+    lv_draw_sw_rgb565_swap(draw_buf,
                            (offsetx2 + 1 - offsetx1) * (offsety2 + 1 - offsety1));
     esp_lcd_panel_draw_bitmap(panel_handle, offsetx1, offsety1, offsetx2 + 1,
-                              offsety2 + 1, px_map);
+                              offsety2 + 1, draw_buf);
 }
 
 static void increase_lvgl_tick(void *arg)
@@ -80,6 +107,7 @@ lv_display_t *lvgl_port_init(esp_lcd_panel_io_handle_t io_handle,
 
     lv_display_t *display =
         lv_display_create(BOARD_LCD_H_RES, BOARD_LCD_V_RES);
+    lv_display_set_rotation(display, LV_DISPLAY_ROTATION_270);
 
     size_t draw_buffer_sz = BOARD_LCD_H_RES * BOARD_LVGL_DRAW_BUF_LINES *
                             sizeof(lv_color16_t);

main/bsp/touch.c

@@ -86,9 +86,9 @@ esp_err_t touch_init(lv_display_t *display)
             .interrupt = 0,
         },
         .flags = {
-            .swap_xy = 0,
+            .swap_xy = BOARD_TOUCH_SWAP_XY,
-            .mirror_x = 0,
+            .mirror_x = BOARD_TOUCH_MIRROR_X,
-            .mirror_y = 0,
+            .mirror_y = BOARD_TOUCH_MIRROR_Y,
         },
         .interrupt_callback = touch_isr_cb,
     };
@@ -103,6 +103,11 @@ esp_err_t touch_init(lv_display_t *display)
     return ESP_OK;
 }
 
+i2c_master_bus_handle_t touch_get_i2c_bus(void)
+{
+    return s_touch_i2c_bus;
+}
+
 #else
 
 esp_err_t touch_init(lv_display_t *display)
@@ -111,4 +116,9 @@ esp_err_t touch_init(lv_display_t *display)
     return ESP_OK;
 }
 
+i2c_master_bus_handle_t touch_get_i2c_bus(void)
+{
+    return NULL;
+}
+
 #endif

main/bsp/touch.h

@@ -1,6 +1,8 @@
 #pragma once
 
+#include "driver/i2c_master.h"
 #include "esp_err.h"
 #include "lvgl.h"
 
 esp_err_t touch_init(lv_display_t *display);
+i2c_master_bus_handle_t touch_get_i2c_bus(void);

main/services/ble_hid.c

@@ -16,22 +16,127 @@
 
 static const char *TAG = "ble_hid";
 
-#define HID_KEYBOARD_REPORT_ID  1
+#define HID_KEYBOARD_REPORT_ID       1
-#define HID_KEYBOARD_REPORT_LEN 7
+#define HID_CONSUMER_REPORT_ID       2
+#define HID_KEYBOARD_REPORT_LEN      8
+#define HID_CONSUMER_REPORT_LEN      2
 
-static const unsigned char s_keyboard_report_map[] = {
+/* Bit positions for ESP-IDF mediaReportMap2 (Windows-compatible). */
-    0x05, 0x01, 0x09, 0x06, 0xA1, 0x01, 0x85, 0x01, 0x05, 0x07, 0x19, 0xE0,
+#define HID_CC_RPT_VOLUME_BITS       0x3F
-    0x29, 0xE7, 0x15, 0x00, 0x25, 0x01, 0x75, 0x01, 0x95, 0x08, 0x81, 0x02,
+#define HID_CC_RPT_BUTTON_BITS       0xF0
-    0x95, 0x01, 0x75, 0x08, 0x81, 0x03, 0x95, 0x05, 0x75, 0x01, 0x05, 0x08,
+#define HID_CC_RPT_VOLUME_UP         0x40
-    0x19, 0x01, 0x29, 0x05, 0x91, 0x02, 0x95, 0x01, 0x75, 0x03, 0x91, 0x03,
+#define HID_CC_RPT_VOLUME_DOWN       0x80
-    0x95, 0x05, 0x75, 0x08, 0x15, 0x00, 0x25, 0x65, 0x05, 0x07, 0x19, 0x00,
+#define HID_CC_RPT_MUTE              1
-    0x29, 0x65, 0x81, 0x00, 0xC0,
+#define HID_CC_RPT_PLAY_PAUSE        13
+#define HID_CC_RPT_SCAN_NEXT_TRK     10
+#define HID_CC_RPT_SCAN_PREV_TRK     11
+
+/*
+ * Keyboard (Report ID 1) + Consumer Control (Report ID 2, mediaReportMap2).
+ * Windows 11 expects the bit-packed consumer report from ESP-IDF examples,
+ * not a raw 16-bit HID usage in the input report.
+ */
+static const unsigned char s_hid_report_map[] = {
+    /* Keyboard - Report ID 1 */
+    0x05, 0x01,        // Usage Page (Generic Desktop)
+    0x09, 0x06,        // Usage (Keyboard)
+    0xA1, 0x01,        // Collection (Application)
+    0x85, HID_KEYBOARD_REPORT_ID,
+    0x05, 0x07,        //   Usage Page (Keyboard/Keypad)
+    0x19, 0xE0,        //   Usage Minimum (0xE0)
+    0x29, 0xE7,        //   Usage Maximum (0xE7)
+    0x15, 0x00,        //   Logical Minimum (0)
+    0x25, 0x01,        //   Logical Maximum (1)
+    0x75, 0x01,        //   Report Size (1)
+    0x95, 0x08,        //   Report Count (8)
+    0x81, 0x02,        //   Input (Data, Variable, Absolute)
+    0x95, 0x01,        //   Report Count (1)
+    0x75, 0x08,        //   Report Size (8)
+    0x81, 0x03,        //   Input (Constant, Variable, Absolute)
+    0x95, 0x05,        //   Report Count (5)
+    0x75, 0x01,        //   Report Size (1)
+    0x05, 0x08,        //   Usage Page (LEDs)
+    0x19, 0x01,        //   Usage Minimum (0x01)
+    0x29, 0x05,        //   Usage Maximum (0x05)
+    0x91, 0x02,        //   Output (Data, Variable, Absolute)
+    0x95, 0x01,        //   Report Count (1)
+    0x75, 0x03,        //   Report Size (3)
+    0x91, 0x03,        //   Output (Constant, Variable, Absolute)
+    0x95, 0x05,        //   Report Count (5)
+    0x75, 0x08,        //   Report Size (8)
+    0x15, 0x00,        //   Logical Minimum (0)
+    0x25, 0x65,        //   Logical Maximum (101)
+    0x05, 0x07,        //   Usage Page (Keyboard/Keypad)
+    0x19, 0x00,        //   Usage Minimum (0x00)
+    0x29, 0x65,        //   Usage Maximum (0x65)
+    0x81, 0x00,        //   Input (Data, Array, Absolute)
+    0xC0,              // End Collection
+
+    /* Consumer Control - Report ID 2 (mediaReportMap2 from ESP-IDF) */
+    0x05, 0x0C,        // Usage Page (Consumer)
+    0x09, 0x01,        // Usage (Consumer Control)
+    0xA1, 0x01,        // Collection (Application)
+    0x85, HID_CONSUMER_REPORT_ID,
+    0x09, 0x02,        //   Usage (Numeric Key Pad)
+    0xA1, 0x02,        //   Collection (Logical)
+    0x05, 0x09,        //     Usage Page (Button)
+    0x19, 0x01,        //     Usage Minimum (0x01)
+    0x29, 0x0A,        //     Usage Maximum (0x0A)
+    0x15, 0x01,        //     Logical Minimum (1)
+    0x25, 0x0A,        //     Logical Maximum (10)
+    0x75, 0x04,        //     Report Size (4)
+    0x95, 0x01,        //     Report Count (1)
+    0x81, 0x00,        //     Input (Data, Array, Absolute)
+    0xC0,              //   End Collection
+    0x05, 0x0C,        //   Usage Page (Consumer)
+    0x09, 0x86,        //   Usage (Channel)
+    0x15, 0xFF,        //   Logical Minimum (-1)
+    0x25, 0x01,        //   Logical Maximum (1)
+    0x75, 0x02,        //   Report Size (2)
+    0x95, 0x01,        //   Report Count (1)
+    0x81, 0x46,        //   Input (Data, Variable, Relative)
+    0x09, 0xE9,        //   Usage (Volume Increment)
+    0x09, 0xEA,        //   Usage (Volume Decrement)
+    0x15, 0x00,        //   Logical Minimum (0)
+    0x75, 0x01,        //   Report Size (1)
+    0x95, 0x02,        //   Report Count (2)
+    0x81, 0x02,        //   Input (Data, Variable, Absolute)
+    0x09, 0xE2,        //   Usage (Mute)
+    0x09, 0x30,        //   Usage (Power)
+    0x09, 0x83,        //   Usage (Recall Last)
+    0x09, 0x81,        //   Usage (Assign Selection)
+    0x09, 0xB0,        //   Usage (Play)
+    0x09, 0xB1,        //   Usage (Pause)
+    0x09, 0xB2,        //   Usage (Record)
+    0x09, 0xB3,        //   Usage (Fast Forward)
+    0x09, 0xB4,        //   Usage (Rewind)
+    0x09, 0xB5,        //   Usage (Scan Next Track)
+    0x09, 0xB6,        //   Usage (Scan Previous Track)
+    0x09, 0xB7,        //   Usage (Stop)
+    0x09, 0xCD,        //   Usage (Play/Pause)
+    0x15, 0x01,        //   Logical Minimum (1)
+    0x25, 0x0D,        //   Logical Maximum (13)
+    0x75, 0x04,        //   Report Size (4)
+    0x95, 0x01,        //   Report Count (1)
+    0x81, 0x00,        //   Input (Data, Array, Absolute)
+    0x09, 0x80,        //   Usage (Selection)
+    0xA1, 0x02,        //   Collection (Logical)
+    0x05, 0x09,        //     Usage Page (Button)
+    0x19, 0x01,        //     Usage Minimum (0x01)
+    0x29, 0x03,        //     Usage Maximum (0x03)
+    0x15, 0x01,        //     Logical Minimum (1)
+    0x25, 0x03,        //     Logical Maximum (3)
+    0x75, 0x02,        //     Report Size (2)
+    0x81, 0x00,        //     Input (Data, Array, Absolute)
+    0xC0,              //   End Collection
+    0x81, 0x03,        //   Input (Constant, Variable, Absolute)
+    0xC0,              // End Collection
 };
 
 static esp_hid_raw_report_map_t s_report_maps[] = {
     {
-        .data = s_keyboard_report_map,
+        .data = s_hid_report_map,
-        .len = sizeof(s_keyboard_report_map),
+        .len = sizeof(s_hid_report_map),
     },
 };
 
@@ -50,9 +155,56 @@ static esp_hidd_dev_t *s_hid_dev;
 static ble_hid_status_cb_t s_status_cb;
 static bool s_connected;
 
+static void ble_hid_cc_set_volume_up(uint8_t *buffer)
+{
+    buffer[0] &= HID_CC_RPT_VOLUME_BITS;
+    buffer[0] |= HID_CC_RPT_VOLUME_UP;
+}
+
+static void ble_hid_cc_set_volume_down(uint8_t *buffer)
+{
+    buffer[0] &= HID_CC_RPT_VOLUME_BITS;
+    buffer[0] |= HID_CC_RPT_VOLUME_DOWN;
+}
+
+static void ble_hid_cc_set_button(uint8_t *buffer, uint8_t button)
+{
+    buffer[1] &= HID_CC_RPT_BUTTON_BITS;
+    buffer[1] |= button;
+}
+
+static bool ble_hid_encode_consumer_report(uint16_t usage, uint8_t buffer[HID_CONSUMER_REPORT_LEN])
+{
+    memset(buffer, 0, HID_CONSUMER_REPORT_LEN);
+
+    switch (usage) {
+    case HID_CONSUMER_VOLUME_UP:
+        ble_hid_cc_set_volume_up(buffer);
+        return true;
+    case HID_CONSUMER_VOLUME_DOWN:
+        ble_hid_cc_set_volume_down(buffer);
+        return true;
+    case HID_CONSUMER_MUTE:
+        ble_hid_cc_set_button(buffer, HID_CC_RPT_MUTE);
+        return true;
+    case HID_CONSUMER_PLAY_PAUSE:
+        ble_hid_cc_set_button(buffer, HID_CC_RPT_PLAY_PAUSE);
+        return true;
+    case HID_CONSUMER_SCAN_NEXT:
+        ble_hid_cc_set_button(buffer, HID_CC_RPT_SCAN_NEXT_TRK);
+        return true;
+    case HID_CONSUMER_SCAN_PREVIOUS:
+        ble_hid_cc_set_button(buffer, HID_CC_RPT_SCAN_PREV_TRK);
+        return true;
+    default:
+        ESP_LOGW(TAG, "unsupported consumer usage 0x%04X", usage);
+        return false;
+    }
+}
+
 static void ble_hid_log_buffer(const char *label, const uint8_t *data, size_t len)
 {
-    char hex[32];
+    char hex[40];
     size_t pos = 0;
 
     for (size_t i = 0; i < len && pos + 3 < sizeof(hex); i++) {
@@ -62,17 +214,33 @@ static void ble_hid_log_buffer(const char *label, const uint8_t *data, size_t le
     ESP_LOGI(TAG, "%s len=%u: %s", label, (unsigned)len, hex);
 }
 
-static void ble_hid_send_idle_report(void)
+static int ble_hid_send_input_report(uint8_t report_id, const uint8_t *buffer, size_t len,
+                                     const char *label)
 {
-    uint8_t buffer[HID_KEYBOARD_REPORT_LEN] = {0};
+    esp_err_t ret;
+
+    if (!ble_hid_ready()) {
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    ble_hid_log_buffer(label, buffer, len);
+    ret = esp_hidd_dev_input_set(s_hid_dev, 0, report_id, (uint8_t *)buffer, len);
+    return (ret == ESP_OK) ? 0 : ret;
+}
+
+static void ble_hid_send_idle_reports(void)
+{
+    uint8_t keyboard[HID_KEYBOARD_REPORT_LEN] = {0};
+    uint8_t consumer[HID_CONSUMER_REPORT_LEN] = {0};
 
     if (!ble_hid_ready()) {
         return;
     }
 
-    ble_hid_log_buffer("idle", buffer, sizeof(buffer));
+    (void)ble_hid_send_input_report(HID_KEYBOARD_REPORT_ID, keyboard, sizeof(keyboard),
-    (void)esp_hidd_dev_input_set(s_hid_dev, 0, HID_KEYBOARD_REPORT_ID, buffer,
+                                   "keyboard idle");
-                                 sizeof(buffer));
+    (void)ble_hid_send_input_report(HID_CONSUMER_REPORT_ID, consumer, sizeof(consumer),
+                                   "consumer idle");
 }
 
 static void ble_hid_idle_task(void *arg)
@@ -80,7 +248,7 @@ static void ble_hid_idle_task(void *arg)
     (void)arg;
     /* Windows often enables notify a few seconds after connect. */
     vTaskDelay(pdMS_TO_TICKS(3500));
-    ble_hid_send_idle_report();
+    ble_hid_send_idle_reports();
     vTaskDelete(NULL);
 }
 
@@ -157,15 +325,15 @@ int ble_hid_init(ble_hid_status_cb_t status_cb)
         return ret;
     }
 
-    ESP_LOGI(TAG, "esp_hidd keyboard ready (report payload=%u bytes)",
+    ESP_LOGI(TAG, "esp_hidd ready (keyboard=%u bytes, consumer=%u bytes)",
-             (unsigned)HID_KEYBOARD_REPORT_LEN);
+             (unsigned)HID_KEYBOARD_REPORT_LEN, (unsigned)HID_CONSUMER_REPORT_LEN);
     return ESP_OK;
 }
 
 void ble_hid_on_input_notify(bool enabled)
 {
     if (enabled) {
-        ble_hid_send_idle_report();
+        ble_hid_send_idle_reports();
     }
 }
 
@@ -177,7 +345,6 @@ bool ble_hid_ready(void)
 int ble_hid_key_press(uint8_t modifier, uint8_t keycode)
 {
     uint8_t buffer[HID_KEYBOARD_REPORT_LEN] = {0};
-    esp_err_t ret;
 
     if (!ble_hid_ready()) {
         return ESP_ERR_INVALID_STATE;
@@ -185,26 +352,18 @@ int ble_hid_key_press(uint8_t modifier, uint8_t keycode)
 
     buffer[0] = modifier;
     buffer[2] = keycode;
-    ble_hid_log_buffer("press", buffer, sizeof(buffer));
+    return ble_hid_send_input_report(HID_KEYBOARD_REPORT_ID, buffer, sizeof(buffer), "press");
-
-    ret = esp_hidd_dev_input_set(s_hid_dev, 0, HID_KEYBOARD_REPORT_ID, buffer,
-                                 sizeof(buffer));
-    return (ret == ESP_OK) ? 0 : ret;
 }
 
 int ble_hid_key_release(void)
 {
     uint8_t buffer[HID_KEYBOARD_REPORT_LEN] = {0};
-    esp_err_t ret;
 
     if (!ble_hid_ready()) {
         return ESP_ERR_INVALID_STATE;
     }
 
-    ble_hid_log_buffer("release", buffer, sizeof(buffer));
+    return ble_hid_send_input_report(HID_KEYBOARD_REPORT_ID, buffer, sizeof(buffer), "release");
-    ret = esp_hidd_dev_input_set(s_hid_dev, 0, HID_KEYBOARD_REPORT_ID, buffer,
-                                 sizeof(buffer));
-    return (ret == ESP_OK) ? 0 : ret;
 }
 
 int ble_hid_send_combo(uint8_t modifier, uint8_t keycode)
@@ -220,6 +379,51 @@ int ble_hid_send_combo(uint8_t modifier, uint8_t keycode)
     return ble_hid_key_release();
 }
 
+int ble_hid_consumer_press(uint16_t usage)
+{
+    uint8_t buffer[HID_CONSUMER_REPORT_LEN] = {0};
+
+    if (!ble_hid_ready()) {
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (usage == 0) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
+    if (!ble_hid_encode_consumer_report(usage, buffer)) {
+        return ESP_ERR_NOT_SUPPORTED;
+    }
+
+    return ble_hid_send_input_report(HID_CONSUMER_REPORT_ID, buffer, sizeof(buffer),
+                                     "consumer press");
+}
+
+int ble_hid_consumer_release(void)
+{
+    uint8_t buffer[HID_CONSUMER_REPORT_LEN] = {0};
+
+    if (!ble_hid_ready()) {
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    return ble_hid_send_input_report(HID_CONSUMER_REPORT_ID, buffer, sizeof(buffer),
+                                     "consumer release");
+}
+
+int ble_hid_send_consumer(uint16_t usage)
+{
+    int rc;
+
+    rc = ble_hid_consumer_press(usage);
+    if (rc != 0) {
+        return rc;
+    }
+
+    vTaskDelay(pdMS_TO_TICKS(100));
+    return ble_hid_consumer_release();
+}
+
 #else
 
 int ble_hid_init(ble_hid_status_cb_t status_cb)
@@ -252,4 +456,10 @@ int ble_hid_send_combo(uint8_t modifier, uint8_t keycode)
     return -1;
 }
 
+int ble_hid_send_consumer(uint16_t usage)
+{
+    (void)usage;
+    return -1;
+}
+
 #endif /* BOARD_BLE_ENABLED */

main/services/ble_hid.h

@@ -9,8 +9,17 @@
 #define HID_MOD_LGUI   0x08
 
 #define HID_KEY_C      0x06
+#define HID_KEY_V      0x19
+#define HID_KEY_X      0x1B
 #define HID_KEY_F5     0x3E
 
+#define HID_CONSUMER_VOLUME_UP       0x00E9
+#define HID_CONSUMER_VOLUME_DOWN     0x00EA
+#define HID_CONSUMER_MUTE            0x00E2
+#define HID_CONSUMER_PLAY_PAUSE      0x00CD
+#define HID_CONSUMER_SCAN_NEXT       0x00B5
+#define HID_CONSUMER_SCAN_PREVIOUS   0x00B6
+
 typedef void (*ble_hid_status_cb_t)(bool connected);
 
 int ble_hid_init(ble_hid_status_cb_t status_cb);
@@ -19,6 +28,7 @@ bool ble_hid_ready(void);
 int ble_hid_key_press(uint8_t modifier, uint8_t keycode);
 int ble_hid_key_release(void);
 int ble_hid_send_combo(uint8_t modifier, uint8_t keycode);
+int ble_hid_send_consumer(uint16_t usage);
 
 #if defined(BOARD_BLE_ENABLED) && BOARD_BLE_ENABLED
 void ble_hid_on_input_notify(bool enabled);

main/ui/screens/ui_Screen1.c

@@ -4,6 +4,7 @@
 // Project name: HeavenlyHeroStar
 
 #include "../ui.h"
+#include "board_config.h"
 
 lv_obj_t * uic_Calendar1;
 lv_obj_t * ui_Screen1 = NULL;
@@ -15,12 +16,13 @@ lv_obj_t * ui_Calendar1 = NULL;
 void ui_Screen1_screen_init(void)
 {
     ui_Screen1 = lv_obj_create(NULL);
+    lv_obj_set_size(ui_Screen1, BOARD_LCD_LOGIC_H_RES, BOARD_LCD_LOGIC_V_RES);
     lv_obj_remove_flag(ui_Screen1, LV_OBJ_FLAG_SCROLLABLE);      /// Flags
 
     ui_Calendar1 = lv_calendar_create(ui_Screen1);
     lv_obj_t * ui_Calendar1_header = lv_calendar_header_arrow_create(ui_Calendar1);
-    lv_obj_set_width(ui_Calendar1, 170);
+    lv_obj_set_width(ui_Calendar1, BOARD_LCD_LOGIC_H_RES);
-    lv_obj_set_height(ui_Calendar1, 320);
+    lv_obj_set_height(ui_Calendar1, BOARD_LCD_LOGIC_V_RES);
     lv_obj_set_align(ui_Calendar1, LV_ALIGN_CENTER);
 
     uic_Calendar1 = ui_Calendar1;

main/ui/screens/ui_Screen2.c

@@ -4,6 +4,7 @@
 // Project name: HeavenlyHeroStar
 
 #include "../ui.h"
+#include "board_config.h"
 
 lv_obj_t * ui_Screen2 = NULL;
 lv_obj_t * ui_Button1 = NULL;
@@ -45,11 +46,14 @@ void ui_event_Button3(lv_event_t * e)
 void ui_Screen2_screen_init(void)
 {
     ui_Screen2 = lv_obj_create(NULL);
+    lv_obj_set_size(ui_Screen2, BOARD_LCD_LOGIC_H_RES, BOARD_LCD_LOGIC_V_RES);
     lv_obj_remove_flag(ui_Screen2, LV_OBJ_FLAG_SCROLLABLE);      /// Flags
 
     ui_Button1 = lv_button_create(ui_Screen2);
     lv_obj_set_width(ui_Button1, 100);
     lv_obj_set_height(ui_Button1, 80);
+    lv_obj_set_x(ui_Button1, -100);
+    lv_obj_set_y(ui_Button1, 0);
     lv_obj_set_align(ui_Button1, LV_ALIGN_CENTER);
     lv_obj_add_flag(ui_Button1, LV_OBJ_FLAG_SCROLL_ON_FOCUS);     /// Flags
     lv_obj_remove_flag(ui_Button1, LV_OBJ_FLAG_SCROLLABLE);      /// Flags
@@ -58,7 +62,7 @@ void ui_Screen2_screen_init(void)
     lv_obj_set_width(ui_Button2, 100);
     lv_obj_set_height(ui_Button2, 80);
     lv_obj_set_x(ui_Button2, 0);
-    lv_obj_set_y(ui_Button2, 100);
+    lv_obj_set_y(ui_Button2, 0);
     lv_obj_set_align(ui_Button2, LV_ALIGN_CENTER);
     lv_obj_add_flag(ui_Button2, LV_OBJ_FLAG_SCROLL_ON_FOCUS);     /// Flags
     lv_obj_remove_flag(ui_Button2, LV_OBJ_FLAG_SCROLLABLE);      /// Flags
@@ -66,8 +70,8 @@ void ui_Screen2_screen_init(void)
     ui_Button3 = lv_button_create(ui_Screen2);
     lv_obj_set_width(ui_Button3, 100);
     lv_obj_set_height(ui_Button3, 80);
-    lv_obj_set_x(ui_Button3, 0);
+    lv_obj_set_x(ui_Button3, 100);
-    lv_obj_set_y(ui_Button3, -100);
+    lv_obj_set_y(ui_Button3, 0);
     lv_obj_set_align(ui_Button3, LV_ALIGN_CENTER);
     lv_obj_add_flag(ui_Button3, LV_OBJ_FLAG_SCROLL_ON_FOCUS);     /// Flags
     lv_obj_remove_flag(ui_Button3, LV_OBJ_FLAG_SCROLLABLE);      /// Flags
@@ -75,6 +79,8 @@ void ui_Screen2_screen_init(void)
     ui_Label2 = lv_label_create(ui_Screen2);
     lv_obj_set_width(ui_Label2, LV_SIZE_CONTENT);   /// 1
     lv_obj_set_height(ui_Label2, LV_SIZE_CONTENT);    /// 1
+    lv_obj_set_x(ui_Label2, -100);
+    lv_obj_set_y(ui_Label2, 0);
     lv_obj_set_align(ui_Label2, LV_ALIGN_CENTER);
     lv_label_set_text(ui_Label2, "Ctrl+C");
 
@@ -82,15 +88,15 @@ void ui_Screen2_screen_init(void)
     lv_obj_set_width(ui_Label4, LV_SIZE_CONTENT);   /// 1
     lv_obj_set_height(ui_Label4, LV_SIZE_CONTENT);    /// 1
     lv_obj_set_x(ui_Label4, 0);
-    lv_obj_set_y(ui_Label4, 100);
+    lv_obj_set_y(ui_Label4, 0);
     lv_obj_set_align(ui_Label4, LV_ALIGN_CENTER);
     lv_label_set_text(ui_Label4, "Ctrl+V");
 
     ui_Label5 = lv_label_create(ui_Screen2);
     lv_obj_set_width(ui_Label5, LV_SIZE_CONTENT);   /// 1
     lv_obj_set_height(ui_Label5, LV_SIZE_CONTENT);    /// 1
-    lv_obj_set_x(ui_Label5, 0);
+    lv_obj_set_x(ui_Label5, 100);
-    lv_obj_set_y(ui_Label5, -100);
+    lv_obj_set_y(ui_Label5, 0);
     lv_obj_set_align(ui_Label5, LV_ALIGN_CENTER);
     lv_label_set_text(ui_Label5, "Ctrl+X");
 

main/ui/screens/ui_Screen3.c

@@ -0,0 +1,139 @@
+// This file was generated by SquareLine Studio
+// SquareLine Studio version: SquareLine Studio 1.6.1
+// LVGL version: 9.2.2
+// Project name: HeavenlyHeroStar
+
+#include "../ui.h"
+#include "board_config.h"
+
+lv_obj_t * ui_Screen3 = NULL;
+lv_obj_t * ui_BtnVolDown = NULL;
+lv_obj_t * ui_BtnVolUp = NULL;
+lv_obj_t * ui_BtnMute = NULL;
+lv_obj_t * ui_BtnPlayPause = NULL;
+lv_obj_t * ui_BtnPrev = NULL;
+lv_obj_t * ui_BtnNext = NULL;
+lv_obj_t * ui_LabelVolDown = NULL;
+lv_obj_t * ui_LabelVolUp = NULL;
+lv_obj_t * ui_LabelMute = NULL;
+lv_obj_t * ui_LabelPlayPause = NULL;
+lv_obj_t * ui_LabelPrev = NULL;
+lv_obj_t * ui_LabelNext = NULL;
+
+static void ui_screen3_create_button(lv_obj_t **btn, lv_obj_t **label, int32_t x, int32_t y,
+                                     const char *text)
+{
+    *btn = lv_button_create(ui_Screen3);
+    lv_obj_set_width(*btn, 90);
+    lv_obj_set_height(*btn, 45);
+    lv_obj_set_x(*btn, x);
+    lv_obj_set_y(*btn, y);
+    lv_obj_set_align(*btn, LV_ALIGN_CENTER);
+    lv_obj_add_flag(*btn, LV_OBJ_FLAG_SCROLL_ON_FOCUS);
+    lv_obj_remove_flag(*btn, LV_OBJ_FLAG_SCROLLABLE);
+
+    *label = lv_label_create(ui_Screen3);
+    lv_obj_set_width(*label, LV_SIZE_CONTENT);
+    lv_obj_set_height(*label, LV_SIZE_CONTENT);
+    lv_obj_set_x(*label, x);
+    lv_obj_set_y(*label, y);
+    lv_obj_set_align(*label, LV_ALIGN_CENTER);
+    lv_label_set_text(*label, text);
+}
+
+// event funtions
+void ui_event_BtnVolDown(lv_event_t * e)
+{
+    lv_event_code_t event_code = lv_event_get_code(e);
+
+    if(event_code == LV_EVENT_CLICKED) {
+        click_consumer_vol_down(e);
+    }
+}
+
+void ui_event_BtnVolUp(lv_event_t * e)
+{
+    lv_event_code_t event_code = lv_event_get_code(e);
+
+    if(event_code == LV_EVENT_CLICKED) {
+        click_consumer_vol_up(e);
+    }
+}
+
+void ui_event_BtnMute(lv_event_t * e)
+{
+    lv_event_code_t event_code = lv_event_get_code(e);
+
+    if(event_code == LV_EVENT_CLICKED) {
+        click_consumer_mute(e);
+    }
+}
+
+void ui_event_BtnPlayPause(lv_event_t * e)
+{
+    lv_event_code_t event_code = lv_event_get_code(e);
+
+    if(event_code == LV_EVENT_CLICKED) {
+        click_consumer_play_pause(e);
+    }
+}
+
+void ui_event_BtnPrev(lv_event_t * e)
+{
+    lv_event_code_t event_code = lv_event_get_code(e);
+
+    if(event_code == LV_EVENT_CLICKED) {
+        click_consumer_prev(e);
+    }
+}
+
+void ui_event_BtnNext(lv_event_t * e)
+{
+    lv_event_code_t event_code = lv_event_get_code(e);
+
+    if(event_code == LV_EVENT_CLICKED) {
+        click_consumer_next(e);
+    }
+}
+
+// build funtions
+
+void ui_Screen3_screen_init(void)
+{
+    ui_Screen3 = lv_obj_create(NULL);
+    lv_obj_set_size(ui_Screen3, BOARD_LCD_LOGIC_H_RES, BOARD_LCD_LOGIC_V_RES);
+    lv_obj_remove_flag(ui_Screen3, LV_OBJ_FLAG_SCROLLABLE);
+
+    ui_screen3_create_button(&ui_BtnVolDown, &ui_LabelVolDown, -50, -55, "Vol-");
+    ui_screen3_create_button(&ui_BtnVolUp, &ui_LabelVolUp, 50, -55, "Vol+");
+    ui_screen3_create_button(&ui_BtnMute, &ui_LabelMute, -50, 0, "Mute");
+    ui_screen3_create_button(&ui_BtnPlayPause, &ui_LabelPlayPause, 50, 0, "Play");
+    ui_screen3_create_button(&ui_BtnPrev, &ui_LabelPrev, -50, 55, "Prev");
+    ui_screen3_create_button(&ui_BtnNext, &ui_LabelNext, 50, 55, "Next");
+
+    lv_obj_add_event_cb(ui_BtnVolDown, ui_event_BtnVolDown, LV_EVENT_ALL, NULL);
+    lv_obj_add_event_cb(ui_BtnVolUp, ui_event_BtnVolUp, LV_EVENT_ALL, NULL);
+    lv_obj_add_event_cb(ui_BtnMute, ui_event_BtnMute, LV_EVENT_ALL, NULL);
+    lv_obj_add_event_cb(ui_BtnPlayPause, ui_event_BtnPlayPause, LV_EVENT_ALL, NULL);
+    lv_obj_add_event_cb(ui_BtnPrev, ui_event_BtnPrev, LV_EVENT_ALL, NULL);
+    lv_obj_add_event_cb(ui_BtnNext, ui_event_BtnNext, LV_EVENT_ALL, NULL);
+}
+
+void ui_Screen3_screen_destroy(void)
+{
+    if(ui_Screen3) lv_obj_del(ui_Screen3);
+
+    ui_Screen3 = NULL;
+    ui_BtnVolDown = NULL;
+    ui_BtnVolUp = NULL;
+    ui_BtnMute = NULL;
+    ui_BtnPlayPause = NULL;
+    ui_BtnPrev = NULL;
+    ui_BtnNext = NULL;
+    ui_LabelVolDown = NULL;
+    ui_LabelVolUp = NULL;
+    ui_LabelMute = NULL;
+    ui_LabelPlayPause = NULL;
+    ui_LabelPrev = NULL;
+    ui_LabelNext = NULL;
+}

main/ui/screens/ui_Screen3.h

@@ -0,0 +1,41 @@
+// This file was generated by SquareLine Studio
+// SquareLine Studio version: SquareLine Studio 1.6.1
+// LVGL version: 9.2.2
+// Project name: HeavenlyHeroStar
+
+#ifndef UI_SCREEN3_H
+#define UI_SCREEN3_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// SCREEN: ui_Screen3
+extern void ui_Screen3_screen_init(void);
+extern void ui_Screen3_screen_destroy(void);
+extern lv_obj_t * ui_Screen3;
+extern void ui_event_BtnVolDown(lv_event_t * e);
+extern lv_obj_t * ui_BtnVolDown;
+extern void ui_event_BtnVolUp(lv_event_t * e);
+extern lv_obj_t * ui_BtnVolUp;
+extern void ui_event_BtnMute(lv_event_t * e);
+extern lv_obj_t * ui_BtnMute;
+extern void ui_event_BtnPlayPause(lv_event_t * e);
+extern lv_obj_t * ui_BtnPlayPause;
+extern void ui_event_BtnPrev(lv_event_t * e);
+extern lv_obj_t * ui_BtnPrev;
+extern void ui_event_BtnNext(lv_event_t * e);
+extern lv_obj_t * ui_BtnNext;
+extern lv_obj_t * ui_LabelVolDown;
+extern lv_obj_t * ui_LabelVolUp;
+extern lv_obj_t * ui_LabelMute;
+extern lv_obj_t * ui_LabelPlayPause;
+extern lv_obj_t * ui_LabelPrev;
+extern lv_obj_t * ui_LabelNext;
+// CUSTOM VARIABLES
+
+#ifdef __cplusplus
+} /*extern "C"*/
+#endif
+
+#endif

main/ui/screens/ui_Settings.c

@@ -0,0 +1,154 @@
+#include "ui_Settings.h"
+
+#include "board_config.h"
+#include "settings/settings_store.h"
+#include "settings/settings_tabs.h"
+#include "ui_handlers.h"
+
+#include <stddef.h>
+
+lv_obj_t *ui_Settings;
+lv_obj_t *ui_Settings_sidebar;
+lv_obj_t *ui_Settings_content;
+
+static settings_tab_t s_active_tab = SETTINGS_TAB_SYSTEM;
+static lv_obj_t *s_nav_buttons[4];
+
+static lv_style_t s_style_sidebar_btn_active;
+static lv_style_t s_style_content_bg;
+static bool s_styles_inited;
+
+static const char *s_tab_labels[] = {
+    "System",
+    "Display",
+    "Audio",
+    "Network",
+};
+
+static void init_styles(void)
+{
+    if (s_styles_inited) {
+        return;
+    }
+
+    lv_style_init(&s_style_sidebar_btn_active);
+    lv_style_set_bg_color(&s_style_sidebar_btn_active,
+                          lv_palette_main(LV_PALETTE_BLUE));
+    lv_style_set_bg_opa(&s_style_sidebar_btn_active, LV_OPA_COVER);
+
+    lv_style_init(&s_style_content_bg);
+    lv_style_set_bg_color(&s_style_content_bg,
+                          lv_palette_lighten(LV_PALETTE_GREY, 2));
+    lv_style_set_bg_opa(&s_style_content_bg, LV_OPA_COVER);
+
+    s_styles_inited = true;
+}
+
+static void sidebar_update_highlight(settings_tab_t tab)
+{
+    for (size_t i = 0; i < 4; i++) {
+        if (s_nav_buttons[i] == NULL) {
+            continue;
+        }
+        if ((settings_tab_t)i == tab) {
+            lv_obj_add_style(s_nav_buttons[i], &s_style_sidebar_btn_active, 0);
+        } else {
+            lv_obj_remove_style(s_nav_buttons[i], &s_style_sidebar_btn_active, 0);
+        }
+    }
+}
+
+settings_tab_t ui_Settings_get_active_tab(void)
+{
+    return s_active_tab;
+}
+
+void ui_Settings_switch_tab(settings_tab_t tab)
+{
+    settings_data_t buf = *settings_store_get();
+    settings_tabs_collect(s_active_tab, &buf);
+    settings_store_update(&buf);
+
+    s_active_tab = tab;
+    sidebar_update_highlight(tab);
+
+    lv_obj_clean(ui_Settings_content);
+    switch (tab) {
+    case SETTINGS_TAB_SYSTEM:
+        load_system_settings(ui_Settings_content, settings_store_get());
+        break;
+    case SETTINGS_TAB_DISPLAY:
+        load_display_settings(ui_Settings_content, settings_store_get());
+        break;
+    case SETTINGS_TAB_AUDIO:
+        load_audio_settings(ui_Settings_content, settings_store_get());
+        break;
+    case SETTINGS_TAB_NETWORK:
+        load_network_settings(ui_Settings_content, settings_store_get());
+        break;
+    default:
+        LV_ASSERT_MSG(false, "unexpected settings_tab_t");
+        break;
+    }
+}
+
+void ui_Settings_screen_init(void)
+{
+    init_styles();
+
+    ui_Settings = lv_obj_create(NULL);
+    lv_obj_set_size(ui_Settings, BOARD_LCD_LOGIC_H_RES, BOARD_LCD_LOGIC_V_RES);
+    lv_obj_set_style_pad_all(ui_Settings, 2, 0);
+    lv_obj_remove_flag(ui_Settings, LV_OBJ_FLAG_SCROLLABLE);
+
+    ui_Settings_sidebar = lv_list_create(ui_Settings);
+    lv_obj_set_size(ui_Settings_sidebar, 90, 170);
+    lv_obj_set_pos(ui_Settings_sidebar, 0, 0);
+    lv_obj_set_style_pad_all(ui_Settings_sidebar, 2, 0);
+    lv_obj_set_style_pad_row(ui_Settings_sidebar, 2, 0);
+    lv_obj_remove_flag(ui_Settings_sidebar, LV_OBJ_FLAG_SCROLLABLE);
+
+    for (size_t i = 0; i < 4; i++) {
+        s_nav_buttons[i] =
+            lv_list_add_button(ui_Settings_sidebar, NULL, s_tab_labels[i]);
+        lv_obj_set_size(s_nav_buttons[i], 86, 28);
+        lv_obj_add_event_cb(s_nav_buttons[i], settings_on_tab_clicked,
+                            LV_EVENT_CLICKED, (void *)(intptr_t)i);
+    }
+
+    lv_obj_t *save_btn = lv_button_create(ui_Settings);
+    lv_obj_set_size(save_btn, 86, 28);
+    lv_obj_set_pos(save_btn, 2, 138);
+    lv_obj_t *save_label = lv_label_create(save_btn);
+    lv_label_set_text(save_label, "Save");
+    lv_obj_center(save_label);
+    lv_obj_add_event_cb(save_btn, settings_on_save_clicked, LV_EVENT_CLICKED,
+                        NULL);
+
+    ui_Settings_content = lv_obj_create(ui_Settings);
+    lv_obj_set_size(ui_Settings_content, 230, 170);
+    lv_obj_set_pos(ui_Settings_content, 90, 0);
+    lv_obj_set_style_pad_all(ui_Settings_content, 2, 0);
+    lv_obj_add_style(ui_Settings_content, &s_style_content_bg, 0);
+    lv_obj_remove_flag(ui_Settings_content, LV_OBJ_FLAG_SCROLLABLE);
+
+    settings_store_load();
+    settings_store_apply();
+
+    s_active_tab = SETTINGS_TAB_SYSTEM;
+    sidebar_update_highlight(s_active_tab);
+    load_system_settings(ui_Settings_content, settings_store_get());
+}
+
+void ui_Settings_screen_destroy(void)
+{
+    if (ui_Settings != NULL) {
+        lv_obj_del(ui_Settings);
+        ui_Settings = NULL;
+        ui_Settings_sidebar = NULL;
+        ui_Settings_content = NULL;
+    }
+    for (size_t i = 0; i < 4; i++) {
+        s_nav_buttons[i] = NULL;
+    }
+}

main/ui/screens/ui_Settings.h

@@ -0,0 +1,14 @@
+#pragma once
+
+#include "lvgl.h"
+#include "settings_types.h"
+
+extern lv_obj_t *ui_Settings;
+extern lv_obj_t *ui_Settings_sidebar;
+extern lv_obj_t *ui_Settings_content;
+
+void ui_Settings_screen_init(void);
+void ui_Settings_screen_destroy(void);
+
+void ui_Settings_switch_tab(settings_tab_t tab);
+settings_tab_t ui_Settings_get_active_tab(void);

main/ui/settings/settings_store.c

@@ -0,0 +1,137 @@
+#include "settings_store.h"
+
+#include "display.h"
+#include "motion_gesture.h"
+
+#include "esp_log.h"
+#include "nvs.h"
+#include "nvs_flash.h"
+
+static const char *TAG = "settings_store";
+
+static const char *SETTINGS_NAMESPACE = "settings";
+
+static const settings_data_t SETTINGS_DEFAULTS = {
+    .notification_enabled = false,
+    .brightness_pct = 70,
+    .volume_pct = 50,
+    .mute = false,
+    .shake_nav_enabled = true,
+    .shake_sensitivity = SHAKE_SENS_MED,
+};
+
+static settings_data_t s_data;
+
+static void load_key_u8(nvs_handle_t handle, const char *key, uint8_t *out,
+                        uint8_t default_val)
+{
+    uint8_t val = default_val;
+    if (nvs_get_u8(handle, key, &val) != ESP_OK) {
+        val = default_val;
+    }
+    *out = val;
+}
+
+void settings_store_load(void)
+{
+    s_data = SETTINGS_DEFAULTS;
+
+    nvs_handle_t handle;
+    esp_err_t err = nvs_open(SETTINGS_NAMESPACE, NVS_READONLY, &handle);
+    if (err != ESP_OK) {
+        ESP_LOGI(TAG, "No saved settings, using defaults");
+        return;
+    }
+
+    uint8_t val;
+    load_key_u8(handle, "notif", &val, SETTINGS_DEFAULTS.notification_enabled);
+    s_data.notification_enabled = val != 0;
+    load_key_u8(handle, "bright", &s_data.brightness_pct,
+                SETTINGS_DEFAULTS.brightness_pct);
+    load_key_u8(handle, "vol", &s_data.volume_pct, SETTINGS_DEFAULTS.volume_pct);
+    load_key_u8(handle, "mute", &val, SETTINGS_DEFAULTS.mute);
+    s_data.mute = val != 0;
+    load_key_u8(handle, "shake_en", &val, SETTINGS_DEFAULTS.shake_nav_enabled);
+    s_data.shake_nav_enabled = val != 0;
+    load_key_u8(handle, "shake_sens", &val, SETTINGS_DEFAULTS.shake_sensitivity);
+    s_data.shake_sensitivity = (shake_sensitivity_t)val;
+
+    nvs_close(handle);
+    ESP_LOGI(TAG, "Settings loaded (bright=%u vol=%u)", s_data.brightness_pct,
+             s_data.volume_pct);
+}
+
+const settings_data_t *settings_store_get(void)
+{
+    return &s_data;
+}
+
+void settings_store_update(const settings_data_t *data)
+{
+    s_data = *data;
+}
+
+esp_err_t settings_store_commit(void)
+{
+    nvs_handle_t handle;
+    esp_err_t err = nvs_open(SETTINGS_NAMESPACE, NVS_READWRITE, &handle);
+    if (err != ESP_OK) {
+        ESP_LOGE(TAG, "nvs_open failed: %s", esp_err_to_name(err));
+        return err;
+    }
+
+    err = nvs_set_u8(handle, "notif", s_data.notification_enabled ? 1 : 0);
+    if (err == ESP_OK) {
+        err = nvs_set_u8(handle, "bright", s_data.brightness_pct);
+    }
+    if (err == ESP_OK) {
+        err = nvs_set_u8(handle, "vol", s_data.volume_pct);
+    }
+    if (err == ESP_OK) {
+        err = nvs_set_u8(handle, "mute", s_data.mute ? 1 : 0);
+    }
+    if (err == ESP_OK) {
+        err = nvs_set_u8(handle, "shake_en", s_data.shake_nav_enabled ? 1 : 0);
+    }
+    if (err == ESP_OK) {
+        err = nvs_set_u8(handle, "shake_sens", (uint8_t)s_data.shake_sensitivity);
+    }
+    if (err == ESP_OK) {
+        err = nvs_commit(handle);
+    }
+
+    nvs_close(handle);
+    if (err != ESP_OK) {
+        ESP_LOGE(TAG, "commit failed: %s", esp_err_to_name(err));
+    }
+    return err;
+}
+
+esp_err_t settings_store_factory_reset(void)
+{
+    nvs_handle_t handle;
+    esp_err_t err = nvs_open(SETTINGS_NAMESPACE, NVS_READWRITE, &handle);
+    if (err == ESP_OK) {
+        err = nvs_erase_all(handle);
+        if (err == ESP_OK) {
+            err = nvs_commit(handle);
+        }
+        nvs_close(handle);
+    }
+
+    s_data = SETTINGS_DEFAULTS;
+    esp_err_t commit_err = settings_store_commit();
+    if (err != ESP_OK) {
+        return err;
+    }
+    return commit_err;
+}
+
+void settings_store_apply(void)
+{
+    uint16_t duty = (uint16_t)((s_data.brightness_pct * 1023U) / 100U);
+    display_backlight_set_brightness(duty);
+
+    motion_gesture_set_enabled(s_data.shake_nav_enabled);
+    motion_gesture_set_sensitivity(s_data.shake_sensitivity);
+}

main/ui/settings/settings_store.h

@@ -0,0 +1,11 @@
+#pragma once
+
+#include "esp_err.h"
+#include "settings_types.h"
+
+void settings_store_load(void);
+const settings_data_t *settings_store_get(void);
+void settings_store_update(const settings_data_t *data);
+esp_err_t settings_store_commit(void);
+esp_err_t settings_store_factory_reset(void);
+void settings_store_apply(void);

main/ui/settings/settings_tabs.c

@@ -0,0 +1,235 @@
+#include "settings_tabs.h"
+
+#include "ui_handlers.h"
+
+static lv_obj_t *s_notif_switch;
+static lv_obj_t *s_shake_nav_switch;
+static lv_obj_t *s_shake_sens_dropdown;
+static lv_obj_t *s_brightness_slider;
+static lv_obj_t *s_brightness_pct_label;
+static lv_obj_t *s_volume_slider;
+static lv_obj_t *s_mute_switch;
+
+static lv_obj_t *create_status_bar(lv_obj_t *content, const char *title)
+{
+    lv_obj_t *status_bar = lv_obj_create(content);
+    lv_obj_set_size(status_bar, 230, 25);
+    lv_obj_set_pos(status_bar, 0, 0);
+    lv_obj_set_style_pad_all(status_bar, 2, 0);
+    lv_obj_set_style_border_width(status_bar, 1, 0);
+    lv_obj_set_style_border_side(status_bar, LV_BORDER_SIDE_BOTTOM, 0);
+    lv_obj_remove_flag(status_bar, LV_OBJ_FLAG_SCROLLABLE);
+
+    lv_obj_t *title_label = lv_label_create(status_bar);
+    lv_label_set_text(title_label, title);
+    lv_obj_align(title_label, LV_ALIGN_LEFT_MID, 2, 0);
+
+    lv_obj_t *time_label = lv_label_create(status_bar);
+    lv_label_set_text(time_label, "--:--");
+    lv_obj_align(time_label, LV_ALIGN_RIGHT_MID, -2, 0);
+
+    return status_bar;
+}
+
+static lv_obj_t *create_settings_body(lv_obj_t *content)
+{
+    lv_obj_t *body = lv_obj_create(content);
+    lv_obj_set_size(body, 230, 145);
+    lv_obj_set_pos(body, 0, 25);
+    lv_obj_set_style_pad_all(body, 2, 0);
+    lv_obj_set_style_border_width(body, 0, 0);
+    lv_obj_remove_flag(body, LV_OBJ_FLAG_SCROLLABLE);
+    return body;
+}
+
+void load_system_settings(lv_obj_t *content, const settings_data_t *data)
+{
+    s_notif_switch = NULL;
+    s_shake_nav_switch = NULL;
+    s_shake_sens_dropdown = NULL;
+
+    create_status_bar(content, "System Settings");
+    lv_obj_t *body = create_settings_body(content);
+
+    lv_obj_t *notif_label = lv_label_create(body);
+    lv_label_set_text(notif_label, "Enable Notification");
+    lv_obj_set_pos(notif_label, 4, 4);
+    lv_obj_set_size(notif_label, 120, 28);
+
+    s_notif_switch = lv_switch_create(body);
+    lv_obj_set_pos(s_notif_switch, 180, 4);
+    lv_obj_set_size(s_notif_switch, 40, 28);
+    if (data->notification_enabled) {
+        lv_obj_add_state(s_notif_switch, LV_STATE_CHECKED);
+    }
+    lv_obj_add_event_cb(s_notif_switch, settings_on_value_changed,
+                        LV_EVENT_VALUE_CHANGED,
+                        (void *)(intptr_t)SETTINGS_FIELD_NOTIFICATION);
+
+    lv_obj_t *shake_nav_label = lv_label_create(body);
+    lv_label_set_text(shake_nav_label, "Shake Navigation");
+    lv_obj_set_pos(shake_nav_label, 4, 40);
+    lv_obj_set_size(shake_nav_label, 120, 28);
+
+    s_shake_nav_switch = lv_switch_create(body);
+    lv_obj_set_pos(s_shake_nav_switch, 180, 40);
+    lv_obj_set_size(s_shake_nav_switch, 40, 28);
+    if (data->shake_nav_enabled) {
+        lv_obj_add_state(s_shake_nav_switch, LV_STATE_CHECKED);
+    }
+    lv_obj_add_event_cb(s_shake_nav_switch, settings_on_value_changed,
+                        LV_EVENT_VALUE_CHANGED,
+                        (void *)(intptr_t)SETTINGS_FIELD_SHAKE_NAV);
+
+    lv_obj_t *shake_sens_label = lv_label_create(body);
+    lv_label_set_text(shake_sens_label, "Shake Sensitivity");
+    lv_obj_set_pos(shake_sens_label, 4, 76);
+    lv_obj_set_size(shake_sens_label, 120, 28);
+
+    s_shake_sens_dropdown = lv_dropdown_create(body);
+    lv_obj_set_pos(s_shake_sens_dropdown, 120, 76);
+    lv_obj_set_size(s_shake_sens_dropdown, 100, 28);
+    lv_dropdown_set_options(s_shake_sens_dropdown, "Low\nMed\nHigh");
+    lv_dropdown_set_selected(s_shake_sens_dropdown, data->shake_sensitivity);
+    lv_obj_add_event_cb(s_shake_sens_dropdown, settings_on_value_changed,
+                        LV_EVENT_VALUE_CHANGED,
+                        (void *)(intptr_t)SETTINGS_FIELD_SHAKE_SENS);
+
+    lv_obj_t *reset_btn = lv_button_create(body);
+    lv_obj_set_pos(reset_btn, 4, 112);
+    lv_obj_set_size(reset_btn, 100, 28);
+    lv_obj_set_style_text_color(reset_btn, lv_palette_main(LV_PALETTE_RED), 0);
+    lv_obj_t *reset_label = lv_label_create(reset_btn);
+    lv_label_set_text(reset_label, "Factory Reset");
+    lv_obj_center(reset_label);
+    lv_obj_add_event_cb(reset_btn, settings_on_factory_reset, LV_EVENT_CLICKED,
+                        NULL);
+}
+
+void load_display_settings(lv_obj_t *content, const settings_data_t *data)
+{
+    s_brightness_slider = NULL;
+    s_brightness_pct_label = NULL;
+
+    create_status_bar(content, "Display Settings");
+    lv_obj_t *body = create_settings_body(content);
+
+    lv_obj_t *bright_label = lv_label_create(body);
+    lv_label_set_text(bright_label, "Brightness");
+    lv_obj_set_pos(bright_label, 4, 4);
+    lv_obj_set_size(bright_label, 80, 28);
+
+    s_brightness_slider = lv_slider_create(body);
+    lv_obj_set_pos(s_brightness_slider, 88, 8);
+    lv_obj_set_size(s_brightness_slider, 100, 12);
+    lv_slider_set_range(s_brightness_slider, 0, 100);
+    lv_slider_set_value(s_brightness_slider, data->brightness_pct, LV_ANIM_OFF);
+
+    s_brightness_pct_label = lv_label_create(body);
+    lv_label_set_text_fmt(s_brightness_pct_label, "%u%%", data->brightness_pct);
+    lv_obj_set_pos(s_brightness_pct_label, 196, 4);
+    lv_obj_set_size(s_brightness_pct_label, 30, 28);
+
+    lv_obj_set_user_data(s_brightness_slider, s_brightness_pct_label);
+    lv_obj_add_event_cb(s_brightness_slider, settings_on_brightness_changed,
+                        LV_EVENT_VALUE_CHANGED, NULL);
+}
+
+void load_audio_settings(lv_obj_t *content, const settings_data_t *data)
+{
+    s_volume_slider = NULL;
+    s_mute_switch = NULL;
+
+    create_status_bar(content, "Audio Settings");
+    lv_obj_t *body = create_settings_body(content);
+
+    lv_obj_t *vol_label = lv_label_create(body);
+    lv_label_set_text(vol_label, "Volume");
+    lv_obj_set_pos(vol_label, 4, 4);
+    lv_obj_set_size(vol_label, 80, 28);
+
+    s_volume_slider = lv_slider_create(body);
+    lv_obj_set_pos(s_volume_slider, 88, 8);
+    lv_obj_set_size(s_volume_slider, 100, 12);
+    lv_slider_set_range(s_volume_slider, 0, 100);
+    lv_slider_set_value(s_volume_slider, data->volume_pct, LV_ANIM_OFF);
+    lv_obj_add_event_cb(s_volume_slider, settings_on_value_changed,
+                        LV_EVENT_VALUE_CHANGED,
+                        (void *)(intptr_t)SETTINGS_FIELD_VOLUME);
+
+    lv_obj_t *mute_label = lv_label_create(body);
+    lv_label_set_text(mute_label, "Mute");
+    lv_obj_set_pos(mute_label, 4, 40);
+    lv_obj_set_size(mute_label, 80, 28);
+
+    s_mute_switch = lv_switch_create(body);
+    lv_obj_set_pos(s_mute_switch, 180, 40);
+    lv_obj_set_size(s_mute_switch, 40, 28);
+    if (data->mute) {
+        lv_obj_add_state(s_mute_switch, LV_STATE_CHECKED);
+    }
+    lv_obj_add_event_cb(s_mute_switch, settings_on_value_changed,
+                        LV_EVENT_VALUE_CHANGED,
+                        (void *)(intptr_t)SETTINGS_FIELD_MUTE);
+}
+
+void load_network_settings(lv_obj_t *content, const settings_data_t *data)
+{
+    (void)data;
+
+    create_status_bar(content, "Network Settings");
+    lv_obj_t *body = create_settings_body(content);
+
+    lv_obj_t *wifi_label = lv_label_create(body);
+    lv_label_set_text(wifi_label, "WiFi: Disabled");
+    lv_obj_set_pos(wifi_label, 4, 4);
+    lv_obj_set_size(wifi_label, 140, 28);
+
+    lv_obj_t *scan_btn = lv_button_create(body);
+    lv_obj_set_pos(scan_btn, 4, 40);
+    lv_obj_set_size(scan_btn, 80, 28);
+    lv_obj_t *scan_label = lv_label_create(scan_btn);
+    lv_label_set_text(scan_label, "Scan");
+    lv_obj_center(scan_label);
+    lv_obj_add_event_cb(scan_btn, settings_on_network_scan_clicked,
+                        LV_EVENT_CLICKED, NULL);
+}
+
+void settings_tabs_collect(settings_tab_t tab, settings_data_t *out)
+{
+    switch (tab) {
+    case SETTINGS_TAB_SYSTEM:
+        if (s_notif_switch != NULL) {
+            out->notification_enabled =
+                lv_obj_has_state(s_notif_switch, LV_STATE_CHECKED);
+        }
+        if (s_shake_nav_switch != NULL) {
+            out->shake_nav_enabled =
+                lv_obj_has_state(s_shake_nav_switch, LV_STATE_CHECKED);
+        }
+        if (s_shake_sens_dropdown != NULL) {
+            out->shake_sensitivity =
+                (shake_sensitivity_t)lv_dropdown_get_selected(s_shake_sens_dropdown);
+        }
+        break;
+    case SETTINGS_TAB_DISPLAY:
+        if (s_brightness_slider != NULL) {
+            out->brightness_pct =
+                (uint8_t)lv_slider_get_value(s_brightness_slider);
+        }
+        break;
+    case SETTINGS_TAB_AUDIO:
+        if (s_volume_slider != NULL) {
+            out->volume_pct = (uint8_t)lv_slider_get_value(s_volume_slider);
+        }
+        if (s_mute_switch != NULL) {
+            out->mute = lv_obj_has_state(s_mute_switch, LV_STATE_CHECKED);
+        }
+        break;
+    case SETTINGS_TAB_NETWORK:
+        break;
+    default:
+        LV_ASSERT_MSG(false, "unexpected settings_tab_t");
+        break;
+    }
+}

main/ui/settings/settings_tabs.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "lvgl.h"
+#include "settings_types.h"
+
+typedef enum {
+    SETTINGS_FIELD_NOTIFICATION = 0,
+    SETTINGS_FIELD_VOLUME,
+    SETTINGS_FIELD_MUTE,
+    SETTINGS_FIELD_SHAKE_NAV,
+    SETTINGS_FIELD_SHAKE_SENS,
+} settings_field_t;
+
+void load_system_settings(lv_obj_t *content, const settings_data_t *data);
+void load_display_settings(lv_obj_t *content, const settings_data_t *data);
+void load_audio_settings(lv_obj_t *content, const settings_data_t *data);
+void load_network_settings(lv_obj_t *content, const settings_data_t *data);
+
+void settings_tabs_collect(settings_tab_t tab, settings_data_t *out);

main/ui/settings/settings_types.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include <stdbool.h>
+#include <stdint.h>
+
+typedef enum {
+    SETTINGS_TAB_SYSTEM = 0,
+    SETTINGS_TAB_DISPLAY,
+    SETTINGS_TAB_AUDIO,
+    SETTINGS_TAB_NETWORK,
+} settings_tab_t;
+
+typedef enum {
+    SHAKE_SENS_LOW = 0,
+    SHAKE_SENS_MED,
+    SHAKE_SENS_HIGH,
+} shake_sensitivity_t;
+
+typedef struct {
+    bool notification_enabled;
+    uint8_t brightness_pct;
+    uint8_t volume_pct;
+    bool mute;
+    bool shake_nav_enabled;
+    shake_sensitivity_t shake_sensitivity;
+} settings_data_t;

main/ui/ui.c

@@ -32,12 +32,16 @@ void ui_init(void)
     lv_disp_set_theme(dispp, theme);
     ui_Screen1_screen_init();
     ui_Screen2_screen_init();
+    ui_Screen3_screen_init();
+    ui_Settings_screen_init();
     ui____initial_actions0 = lv_obj_create(NULL);
-    lv_disp_load_scr(ui_Screen2);
+    lv_disp_load_scr(ui_Settings);
 }
 
 void ui_destroy(void)
 {
     ui_Screen1_screen_destroy();
     ui_Screen2_screen_destroy();
+    ui_Screen3_screen_destroy();
+    ui_Settings_screen_destroy();
 }

main/ui/ui.h

@@ -20,6 +20,8 @@ extern "C" {
 
 #include "screens/ui_Screen1.h"
 #include "screens/ui_Screen2.h"
+#include "screens/ui_Screen3.h"
+#include "screens/ui_Settings.h"
 
 ///////////////////// VARIABLES ////////////////////
 

main/ui/ui_events.c

@@ -24,3 +24,33 @@ void click_button_one(lv_event_t * e)
 {
 	// Your code here
 }
+
+void click_consumer_vol_up(lv_event_t * e)
+{
+	// Your code here
+}
+
+void click_consumer_vol_down(lv_event_t * e)
+{
+	// Your code here
+}
+
+void click_consumer_mute(lv_event_t * e)
+{
+	// Your code here
+}
+
+void click_consumer_play_pause(lv_event_t * e)
+{
+	// Your code here
+}
+
+void click_consumer_prev(lv_event_t * e)
+{
+	// Your code here
+}
+
+void click_consumer_next(lv_event_t * e)
+{
+	// Your code here
+}

main/ui/ui_events.h

@@ -16,6 +16,12 @@ void update_year_action(lv_event_t * e);
 void click_button_two(lv_event_t * e);
 void click_button_three(lv_event_t * e);
 void click_button_one(lv_event_t * e);
+void click_consumer_vol_up(lv_event_t * e);
+void click_consumer_vol_down(lv_event_t * e);
+void click_consumer_mute(lv_event_t * e);
+void click_consumer_play_pause(lv_event_t * e);
+void click_consumer_prev(lv_event_t * e);
+void click_consumer_next(lv_event_t * e);
 
 #ifdef __cplusplus
 } /*extern "C"*/